Publications

Single copies of the articles can be downloaded ONLY for personal use and internal institutional use, excluding commercial use or systematic distribution.

Papers in international journals

  1. A. Viguerie, G. Lorenzo, F. Auricchio, D. Baroli, T.J.R. Hughes, A. Patton, A. Reali, T.E. Yankeelov, A. Veneziani. “Simulating the spread of COVID-19 via a spatially-resolved susceptible–exposed–infected–recovered–deceased (SEIRD) model with heterogeneous diffusion”, Applied Mathematics Letters (2021) – DOI: 10.1016/j.aml.2020.106617
  2. A. Finotello, R.M. Romarowski, R. Gorla, G. Bianchi, F. Bedogni, F. Auricchio, S. Morganti. “Performance of high conformability vs. high radial force devices in the virtual treatment of TAVI patients with Bicuspid Aortic Valve”, Medical Engineering & Physics (2021) – DOI: 10.1016/j.medengphy.2021.02.004
  3. E. López-Oliver, C. Tomassoni, L. Silvestri, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “3-D-Printed Compact Bandpass Filters Based on Conical Posts”, IEEE Transactions on Microwave Theory and Techniques (2021) – DOI: 10.1109/TMTT.2020.3035168
  4. R. Gorla, M. Casenghi, A. Finotello, F. De Marco, S. Morganti, D. Regazzoli, G. Bianchi, E. Acerbi, A. Popolo Rubbio, N. Brambilla, L. Testa, F. Castriota, F. Auricchio, B. Reimbers, F. Bedogni. “Outcome of transcatheter aortic valve replacement in bicuspid aortic valve stenosis with new-generation devices”, Interactive Cardiovascular and Thoracic Surgery (2021) – DOI: 10.1093/icvts/ivaa231
  5. E. Lanzarone, A. Finotello, B. Pane, G. Pratesi, D. Palombo, M. Conti, G. Spinella. “Prediction Model of Isolated Iliac and Abdominal Aneurysms”, European Journal of Clinical Investigation (2021) – DOI: 10.1111/eci.13517
  6. A. Finotello, G. Spinella, G. Notini, D. Palombo, G. Pratesi, S. Mambrini, F. Auricchio, M. Conti, B. Pane. “Geometric Analysis to Determine Kinking and Shortening of Bridging Stents After Branched Endovascular Aortic Repair”, CardioVascular and Interventional Radiology (2021) – DOI: 10.1007/s00270-021-02773-w – Open Access article under the CC BY license
  7. G.M. Rocco, N. Delmonte, D. Schreurs, S. Marconi, F. Auricchio, M. Bozzi. “3D-printed pumpkin-shaped cavity resonator to determine the complex permittivity of liquids”, Microwave and Optical Technology Letters (2021) – DOI: 10.1002/mop.32708
  8. D. Allegrini, G. Montesano, S. Marconi, N. Rosso, G. Ometto, R. Raimondi, F. Auricchio, P. Tsoutsanis, F. Semeraro, M. Cacciatori, D.P. Crabb, M.R. Romano. “A novel quantitative analysis method for idiopathic epiretinal membrane”, PLoS ONE (2021) – DOI: 10.1371/journal.pone.0247192 – Open Access article under the CC BY license

 

Papers in international conference proceedings

  1. M. Lo Rito, R.M. Romarowski, A. Rosato, S. Pica, F. Secchi, A. Giamberti, F. Auricchio, A. Frigiola, M. Conti. “Anomalous aortic origin of coronary artery biomechanical modeling: Toward clinical application”, Journal of Thoracic and Cardiovascular Surgery (2021) – DOI: 10.1016/j.jtcvs.2020.06.150

Papers in international journals

  1. R. Gorla, F. De Marco, S. Morganti, A. Finotello, N. Brambilla, L. Testa, M.L. Agnifili, M. Tusa, F. Auricchio, F. Bedogni. “Transcatheter aortic valve implantation with Portico and Evolut-R in patients with elliptic aortic annulus”, EuroIntervention (2020) – DOI: 10.4244/EIJ-D-19-00115
  2. V. Mercuri, G. Balduzzi, D. Asprone, F. Auricchio. “Structural analysis of non-prismatic beams: Critical issues, accurate stress recovery, and analytical definition of the Finite Element (FE) stiffness matrix”, Engineering Structures (2020) – DOI: 10.1016/j.engstruct.2020.110252
  3. L. Casagrande, L. Esposito, C. Menna, D. Asprone, F. Auricchio. “Effect of testing procedures on buildability properties of 3D-printable concrete”, Construction and Building Materials (2020) – DOI: 10.1016/j.conbuildmat.2020.118286
  4. A. Viguerie, S. Bertoluzza, F. Auricchio. “A Fat boundary-type method for localized nonhomogeneous material problems”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.112983
  5. E.S. Keneth, G. Scalet, M. Layani, G. Tibi, A. Degani, F. Auricchio, S. Magdassi. “Pre-Programmed Tri-Layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes”, Soft Robotics (2020) – DOI: 10.1089/soro.2018.0159
  6. V.M. Belvroy, R.M. Romarowski, T.M.J. van Bakel, J.A. van Herwaarden, J. Bismuth, F. Auricchio, F.L. Moll, S. Trimarchi. “Impact of Aortic Tortuosity on Displacement Forces in Descending Thoracic Aortic Aneurysms”, European Journal of Vascular and Endovascular Surgery (2020) – DOI: 10.1016/j.ejvs.2019.09.503
  7. A. Finotello, E. Faggiano, M. Conti, G. Spinella, B. Pane, D. Palombo, F. Auricchio. “Medical image analysis to measure the follow-up geometry of thoraco-abdominal aortic aneurysms treated with multilayer flow modulator stent”, Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization (2020) – DOI: 10.1080/21681163.2019.1617195
  8. P. Totaro, S. Marconi, S. Morganti, A.G. Corsico, S. Pelenghi, F. Auricchio. “Multidisciplinary preoperative simulations to optimize surgical outcomes in a challenging case of the complete double aortic arch in the adult”, Journal of Cardiac Surgery (2020) – DOI: 10.1111/jocs.14448
  9. P. Canzi, P. Capaccio, S. Marconi, G. Conte, L. Preda, I. Avato, F. Aprile, M. Gaffuri, A. Occhini, L. Pignataro, F. Auricchio, M. Benazzo. “Feasibility of 3D printed salivary duct models for sialendoscopic skills training: preliminary report”, European Archives of Oto-Rhino-Laryngology (2020) – DOI: 10.1007/s00405-019-05763-4
  10. E.S. Keneth, R. Lieberman, M. Rednor, G. Scalet, F. Auricchio, S. Magdassi. “Multi-material 3D printed shape memory polymer with tunable melting and glass transition temperature activated by heat or light”, Polymers (2020) – DOI: 10.3390/polym12030710 – Open Access article under the CC BY license
  11. G.M. Rocco, M. Bozzi, D. Schreurs, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “3-D Printed Microfluidic Sensor in SIW Technology for Liquids’ Characterization”, IEEE Transactions on Microwave Theory and Techniques (2020) – DOI: 10.1109/TMTT.2019.2953580
  12. A. Vigliotti, F. Auricchio. “Automatic Differentiation for Solid Mechanics”, Archives of Computational Methods in Engineering (2020) – DOI: 10.1007/s11831-019-09396-y
  13. N. Inverardi, S. Pandini, F. Bignotti, G. Scalet, S. Marconi, F. Auricchio. Sequential Motion of 4D Printed Photopolymers with Broad Glass Transition”, Macromolecular Materials and Engineering (2020) – DOI: 10.1002/mame.201900370
  14. S. Pandini, N. Inverardi, G. Scalet, D. Battini, F. Bignotti, S. Marconi, F. Auricchio. “Shape memory response and hierarchical motion capabilities of 4D printed auxetic structures”, Mechanics Research Communications (2020) – DOI: 10.1016/j.mechrescom.2019.103463
  15. A. Pietrabissa, S. Marconi, E. Negrello, V. Mauri, A. Peri, L. Pugliese, E.M. Marone, F. Auricchio. “An overview on 3D printing for abdominal surgery”, Surgical Endoscopy (2020) – DOI: 10.1007/s00464-019-07155-5
  16. G. Spinella, A. Finotello, F.R. Pisa, M. Conti, S. Mambrini, G. Pratesi, F. Auricchio, D. Palombo, B. Pane. “Geometrical Evaluation of Aortic Sac Remodeling During Two-Step Thoracoabdominal Aortic Aneurysm Endovascular Repair”, Annals of Vascular Surgery (2020) – DOI: 10.1016/j.avsg.2020.03.011
  17. S. Pisani, R. Dorati, F. Scocozza, C. Mariotti, E. Chiesa, G. Bruni, I. Genta, F. Auricchio, M. Conti, B. Conti. “Preliminary investigation on a new natural based poly(gamma-glutamic acid)/Chitosan bioink”, Journal of Biomedical Materials Research – Part B Applied Biomaterials (2020) – DOI: 10.1002/jbm.b.34602
  18. F. Nappi, L. Mazzocchi, I. Timofeva, L. MacRon, S. Morganti, S.S.A. Singh, D. Attias, A. Congedo, F. Auricchio. “A finite element analysis study from 3D CT to predict transcatheter heart valve thrombosis”, Diagnostics (2020) – DOI: 10.3390/diagnostics10040183 – Open Access article under the CC BY license
  19. P. Canzi, I. Avato, S. Marconi, M. Del Maestro, A.G. Lucifero, M. Magnetto, E. Carlotto, F. Auricchio, S. Luzzi, M. Benazzo. “A 3D printed custom-made mask model for frameless neuronavigation during retrosigmoid craniotomy. A preclinical cadaveric feasibility study”, Annali italiani di chirurgia (2020) – PMID: 32573486
  20. E.M. Marone, L.F. Rinaldi, M. Conti, S. Marconi, F. Auricchio, A. Pietrabissa, G. Basile. Three-Dimensional Printed Models Can Help Settle Malpractice Litigation Over Surgical Interventions, Annals of Vascular Surgery (2020) – DOI: 10.1016/j.avsg.2020.01.001
  21. S.C. Divi, C.V. Verhoosel, F. Auricchio, A. Reali, E.H. van Brummelen. “Error-estimate-based adaptive integration for immersed isogeometric analysis”, Computers and Mathematics with Applications (2020) – DOI: 10.1016/j.camwa.2020.03.026Open Access article under the CC BY license
  22. D. D’Angella, A. Reali. “Efficient extraction of hierarchical B-Splines for local refinement and coarsening of Isogeometric Analysis”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.113131
  23. A. Chiappa, C. Groth, A. Reali, M.E. Biancolini. “A stress recovery procedure for laminated composite plates based on strong-form equilibrium enforced via the RBF Kansa method”, Composite Structures (2020) – DOI: 10.1016/j.compstruct.2020.112292
  24. P. Antolin, J. Kiendl, M. Pingaro, A. Reali. “A simple and effective method based on strain projections to alleviate locking in isogeometric solid shells”, Computational Mechanics (2020) – DOI: 10.1007/s00466-020-01837-x
  25. A. Nitti, J. Kiendl, A. Reali, M.D. de Tullio. “An immersed-boundary/isogeometric method for fluid–structure interaction involving thin shells”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.112977
  26. G. Lorenzo, T.J.R. Hughes, A. Reali, H. Gomez. “A numerical simulation study of the dual role of 5α-reductase inhibitors on tumor growth in prostates enlarged by benign prostatic hyperplasia via stress relaxation and apoptosis upregulation”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.112843
  27. S. Morganti, M.L. Mazzucchelli, M. Alvaro, A. Reali. “A numerical application of the Eshelby theory for geobarometry of non-ideal host-inclusion systems”, Meccanica (2020) – DOI: 10.1007/s11012-020-01135-z
  28. S.F. Hosseini, A. Hashemian, A. Reali. “Studies on knot placement techniques for the geometry construction and the accurate simulation of isogeometric spatial curved beams”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2019.112705
  29. B. Aylaj, N. Bellomo, L. Gibelli, A. Reali. “A unified multiscale vision of behavioral crowds”, Mathematical Models and Methods in Applied Sciences (2020) – DOI: 10.1142/S0218202520500013
  30. E. Marino, S.F. Hosseini, A. Hashemian, A. Reali. “Effects of parameterization and knot placement techniques on primal and mixed isogeometric collocation formulations of spatial shear-deformable beams with varying curvature and torsion”, Computers and Mathematics with Applications (2020) – DOI: 10.1016/j.camwa.2020.06.006
  31. M. Mazzoleni, P. Paron, A. Reali, D. Juizo, J. Manane, L. Brandimarte. “Testing UAV-derived topography for hydraulic modelling in a tropical environment”, Natural Hazards (2020) – DOI: 10.1007/s11069-020-03963-4 – Open Access article under the CC BY license
  32. L. Coradello, D. D’Angella, M. Carraturo, J. Kiendl, S. Kollmannsberger, E. Rank, A. Reali. “Hierarchically refined isogeometric analysis of trimmed shells”, Computational Mechanics (2020) – DOI: 10.1007/s00466-020-01858-6
  33. F. Fahrendorf, S. Morganti, A. Reali, T.J.R. Hughes, L. De Lorenzis. “Mixed stress-displacement isogeometric collocation for nearly incompressible elasticity and elastoplasticity”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.113112
  34. F. Auricchio, E. Bonetti, M. Carraturo, D. Hömberg, A. Reali, E. Rocca. “A phase-field based graded-material topology optimization with stress constraint”, Mathematical Models and Methods in Applied Sciences (2020) – DOI: 10.1142/S0218202520500281
  35. P. Colli, G. Marinoschi, G. Lorenzo, H. Gomez, A. Reali, E. Rocca. “Mathematical analysis and simulation study of a phase-field model of prostate cancer growth with chemotherapy and antiangiogenic therapy effects”, Mathematical Models and Methods in Applied Sciences (2020) – DOI: 10.1142/S0218202520500220
  36. L.G. Rebholz, A. Viguerie, M. Xiao. “Analysis of Algebraic Chorin Temam splitting for incompressible NSE and comparison to Yosida methods”, Journal of Computational and Applied Mathematics (2020) – DOI: 10.1016/j.cam.2019.112366
  37. A. Viguerie, A. Veneziani, G. Lorenzo, D. Baroli, N. Aretz-Nellesen, A. Patton, T.E. Yankeelov, A. Reali, T.J.R. Hughes, F. Auricchio. “Diffusion–reaction compartmental models formulated in a continuum mechanics framework: application to COVID-19, mathematical analysis, and numerical study”, Computational Mechanics (2020) – DOI: 10.1007/s00466-020-01888-0Open Access article under the CC BY license
  38. C. Spadaccio, L. Mazzocchi, I. Timofeva, L. Macron, C.N. De Cecco, S. Morganti, F. Auricchio, F. Nappi. “Bioengineering case study to evaluate complications of adverse anatomy of aortic root in transcatheter aortic valve replacement: Combining biomechanical modelling with CT imaging”, Bioengineering (2020) – DOI: 10.3390/bioengineering7040121 – Open Access article under the CC BY license
  39. M. Carraturo, J. Jomo, S. Kollmansberger, A. Reali, F. Auricchio, E. Rank. “Modeling and experimental validation of an immersed thermo-mechanical part-scale analysis for laser powder bed fusion processes”, Additive Manufacturing (2020) – DOI: 10.1016/j.addma.2020.101498
  40. M. Conti, A. Ferrarini, A. Finotello, G. Salsano, F. Auricchio, D. Palombo, G. Spinella, B. Pane. “Patient-specific computational fluid dynamics of femoro-popliteal stent-graft thrombosis”, Medical Engineering and Physics (2020) – DOI: 10.1016/j.medengphy.2020.10.011 Open Access article under the CC BY license
  41. H. Garcia-Martinez, E. Avila-Navarro, G. Torregrosa-Penalva, N. Delmonte, L. Silvestri, S. Marconi, G. Alaimo, F. Auricchio, M. Bozzi. “Design and fabrication of a band-pass filter with ebg single-ridge waveguide using additive manufacturing techniques”, IEEE Transactions on Microwave Theory and Techniques (2020) – DOI: 10.1109/TMTT.2020.3006836
  42. A. Fantazzini, M. Esposito, A. Finotello, F. Auricchio, B. Pane, C. Basso, G. Spinella, M. Conti. “3D Automatic Segmentation of Aortic Computed Tomography Angiography Combining Multi-View 2D Convolutional Neural Networks”, Cardiovascular Engineering and Technology (2020) – DOI: 10.1007/s13239-020-00481-z – Open Access article under the CC BY license
  43. F. De Grazia, S. Marconi, M. Bardone, A. Mauro, G. Alaimo, F. Auricchio, A. Pietrabissa, A. Di Sabatino. “Use of 3D printer for face mask production to protect endoscopy unit personnel in contact with high-risk patients during COVID-19 pandemic”, Endoscopy (2020) – DOI: 10.1055/a-1206-0937
  44. E. Shafei, S. Faroughi, A. Reali. “Geometrically nonlinear vibration of anisotropic composite beams using isogeometric third-order shear deformation theory”, Composite Structures (2020) – DOI: 10.1016/j.compstruct.2020.112627
  45. L. Leonetti, F.S. Liguori, D. Magisano, J. Kiendl, A. Reali, G. Garcea. “A robust penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches in large deformations”, Computer Methods in Applied Mechanics and Engineering (2020) – DOI: 10.1016/j.cma.2020.113289
  46. G. Spinella, S. Mambrini, A. Finotello, M. Conti, R. Del Pizzo, G. Pratesi, D. Palombo, B. Pane. “Endovascular Treatment of an Internal Iliac Artery Aneurysm in a Patient with Previous Aortic Surgery Using a Novel Covered Stent Graft”, Annals of Vascular Surgery (2020) – DOI: 10.1016/j.avsg.2019.10.059
  47. A. Cattenone, S. Morganti, F. Auricchio. “Basis of the Lattice Boltzmann Method for Additive Manufacturing”, Archives of Computational Methods in Engineering (2020) – DOI: 10.1007/s11831-019-09347-7

 

Papers in international conference proceedings

  1. E. Lopez-Oliver, C. Tomassoni, L. Silvestri, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “3-D printed bandpass filter using conical posts interlaced vertically”, IEEE MTT-S International Microwave Symposium Digest (2020) – DOI: 10.1016/j.compstruc.2019.106104
  2. A. Düster, A. Reali, G. Sangalli, Z. Yosibash. “HOFEIM 2019”, Computers and Mathematics with Applications (2020) – DOI: 10.1016/j.camwa.2020.10.007

 

Book Chapters

  1. L. Casagrande, L. Esposito, C. Menna, D. Asprone, F. Auricchio. “Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects”, in “RILEM Bookseries”, Springer (2020) – DOI: 10.1007/978-3-030-49916-7_42
  2. F. Garotta, N. Demo, M. Tezzele, M. Carraturo, A. Reali, G. Rozza. “Reduced order isogeometric analysis approach for pdes in parametrized domains, in “Lecture Notes in Computational Science and Engineering”,  Springer (2020) – DOI: 10.1007/978-3-030-48721-8_7

Papers in international journals

  1. A. Finotello, S. Marconi, B. Pane, M. Conti, V. Gazzola, S. Mambrini, F. Auricchio, D. Palombo, G. Spinella. “Twelve-year Follow-up Post–Thoracic Endovascular Repair in Type B Aortic Dissection Shown by Three-dimensional Printing”, Annals of Vascular Surgery (2019) – DOI: 10.1016/j.avsg.2018.07.057
  2. A. Ferrigno , F. Di Caprio, R. Borrelli, F. Auricchio, A. Vigliotti. “The mechanical strength of Ti-6Al-4V columns with regular octet microstructure manufactured by electron beam melting”, Materialia (2019) – DOI: 10.1016/j.mtla.2019.100232
  3. F. Auricchio, M. Conti, R.M. Romarowski, H.W. De Beaufort, V. Grassi, S. Trimarchi. “Computational tools for thoracic endovascular aortic repair planning”, Italian Journal of Vascular and Endovascular Surgery (2019) – DOI: 10.23736/s1824-4777.18.01386-4
  4. T. Hoang, C.V. Verhoosel, C.Z. Qin, F. Auricchio, A. Reali, E.H. van Brummelen. “Skeleton-stabilized immersogeometric analysis for incompressible viscous flow problems”, Computer Methods in Applied Mechanics and Engineering (2019) – DOI: 10.1016/j.cma.2018.10.015
  5. L. Casagrande, A. Bonati, A. Occhiuzzi, N. Caterino, F. Auricchio. “Numerical investigation on the seismic dissipation of glazed curtain wallequipped on high-rise buildings”, Engineering Structures (2019) – DOI: 10.1016/j.engstruct.2018.10.086
  6. L. Casagrande, J. Sisinni, A. Bonati, A. Occhiuzzi, F. Auricchio. “Integrated shape memory alloy devices toward a high-performance glazedcurtain wall seismic retrofit”, Engineering Structures (2019) – DOI: 10.1016/j.engstruct.2018.11.023
  7. D.S. Branciforti, S. Lazzaroni, C. Milanese, M. Castiglioni, F. Auricchio, D. Pasini, D. Dondi. “Visible light 3D printing with epoxidized vegetable oils”, Additive Manufacturing (2019) – DOI: 10.1016/j.addma.2018.11.020
  8. A. Cattenone, S. Morganti, G. Alaimo, F. Auricchio. “Finite Element Analysis of Additive Manufacturing Based on Fused Deposition Modeling: Distortions Prediction and Comparison With Experimental Data”, Journal of Manufacturing Science and Engineering-Transactions of the ASME (2019) – DOI: 10.1115/1.4041626
  9. M. Conti, S. Vandenberghe, S. Marconi, E. Ferrari, R.M. Romarowski, S. Morganti, F. Auricchio, S. Demertzis. “Reversed Auxiliary Flow to Reduce Embolism Risk During TAVI: A Computational Simulation and Experimental Study”, Cardiovascular Engineering and Technology (2019) – DOI: 10.1007/s13239-018-00386-y
  10. A. Montanino, D. Asprone, A. Reali, F. Auricchio. “A Least Square Residual version of the Modified Finite Particle Method to solve saddle point problems: Application to stationary Stokes and Navier-Stokes equations”, International Journal of Mechanical Sciences (2019) – DOI: 10.1016/j.ijmecsci.2018.10.035
  11. L.G. Rebholz, A. Viguerie, M. Xiao. “Efficient nonlinear iteration schemes based on algebraic splitting for the incompressible Navier-Stokes equations”, Mathematics of Computation (2019) – DOI: 10.1090/mcom/3411
  12. A. Viguerie, M. Xiao. “Effective Chorin-Temam algebraic splitting schemes for the steady Navier-Stokes equations”, Numerical Methods for Partial Differential Equations (2019) – DOI: 10.1002/num.22326
  13. S. Kollmannsberger, M. Carraturo, A. Reali, F. Auricchio. “Accurate Prediction of Melt Pool Shapes in Laser Powder Bed Fusion by the Non-Linear Temperature Equation Including Phase Changes”, Integrating Materials and Manufacturing Innovation (2019) – DOI: 10.1007/s40192-019-00132-9
  14. G. Alaimo, F. Auricchio, S. Marfia, E. Sacco. “Optimization clustering technique for PieceWise Uniform Transformation Field Analysis homogenization of viscoplastic composites”, Computational Mechanics (2019) – DOI: 10.1007/s00466-019-01730-2
  15. O.I. Hassan, A. Ghavamian, C.H. Lee, A.J. Gil, J. Bonet, F. Auricchio. “An upwind vertex centred finite volume algorithm for nearly and truly incompressible explicit fast solid dynamic applications: Total and Updated Lagrangian formulations”, Journal of Computational Physics (2019) – DOI: 10.1016/j.jcpx.2019.100025Open Access article under the CC BY-NC-ND license
  16. G. Spinella, A. Finotello, B. Pane, G. Salsano, S. Mambrini, A. Kamenskiy, V. Gazzola, G. Cittadini, F. Auricchio, D. Palombo, M. Conti. “In Vivo Morphological Changes of the Femoropopliteal Arteries due to Knee Flexion After Endovascular Treatment of Popliteal Aneurysm”, Journal of Endovascular Therapy (2019) – DOI: 10.1177/1526602819855441
  17. G. Scalet, F. Niccoli, C. Garion, P. Chiggiato, C. Maletta, F. Auricchio. “A three-dimensional phenomenological model for shape memory alloys including two-way shape memory effect and plasticity”, Mechanics of Materials (2019) – DOI: 10.1016/j.mechmat.2019.103085
  18. M. Corti, E. Calleri, S. Perteghella, A. Ferrara, R. Tamma, C. Milanese, D. Mandracchia, G. Brusotti, M.L. Torre, D. Ribatti, F. Auricchio, G. Massolini, G. Tripodo. “Polyacrylate/polyacrylate-PEG biomaterials obtained by high internal phase emulsions (HIPEs) with tailorable drug release and effective mechanical and biological properties”, Materials Science & Engineering (2019) – DOI: 10.1016/j.msec.2019.110060
  19. A. Hajikhani, F. Scocozza, M. Conti, M. Marino, F. Auricchio, P. Wriggers. “Experimental characterization and computational modeling of hydrogel cross-linking for bioprinting applications”, The international Journal of Artificial Organs (2019) – DOI: 10.1177/0391398819856024
  20. T. Pastore, V. Mercuri, C. Menna, D. Asprone, P. Festa, F. Auricchio. “Topology optimization of stress-constrained structural elements usingrisk-factor approach”, Computers & Structures (2019) – DOI: 10.1016/j.compstruc.2019.106104
  21. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio. “Modeling the non-trivial behavior of anisotropic beams: A simple Timoshenko beam with enhanced stress recovery and constitutive relations”, Composite Structures (2019) – DOI: 10.1016/j.compstruct.2019.111265
  22. R.M. Romarowski, E. Faggiano, M. Conti, A. Reali, S. Morganti, F. Auricchio. “A novel computational framework to predict patient-specific hemodynamics after TEVAR: integration of structural and fluid-dynamics analysis by image elaboration”, Computers and Fluids (2019) – DOI: 10.1016/j.compfluid.2018.06.002
  23. A. Melocchi, M. Uboldi, N. Inverardi, F. Briatico-Vangosa, F. Baldi, S. Pandini, G. Scalet, F. Auricchio, M. Cerea, A. Foppoli, A. Maroni, L. Zema, A. Gazzaniga. “Expandable drug delivery system for gastric retention based on shape memory polymers: Development via 4D printing and extrusion”, International Journal of Pharmaceutics (2019) – DOI: 10.1016/j.ijpharm.2019.118700
  24. D. Spinelli, S. Marconi, R. Caruso, M. Conti, F. Benedetto, H.W. De Beaufort, F. Auricchio, S. Trimarchi. “3D printing of aortic models as a teaching tool for improving understanding of aortic disease”, The Journal of Cardiovascular Surgery (2019) – DOI: 10.23736/S0021-9509.19.10841-5
  25. C. Anzolini, F. Nestola, M.L. Mazzucchelli, M. Alvaro, P. Nimis, A. Gianese, S. Morganti, F. Marone, M. Campione, M.T. Hutchinson, J.W. Harris. “Depth of diamond formation obtained from single periclase inclusions”, Geology (2019) – DOI: 10.1130/G45605.1
  26. L. Casagrande, E. Villa, A. Nespoli, A. Occhiuzzi, A. Bonati, F. Auricchio. “Innovative dampers as floor isolation systems for seismically-retrofit multi-storey critical facilities”, Engineering Structures (2019) – DOI: 10.1016/j.engstruct.2019.109772
  27. M. Carraturo, E. Rocca, E. Bonetti, D. Hömberg, A. Reali, F. Auricchio. “Graded-material design based on phase-field and topology optimization”, Computational Mechanics (2019) – DOI: 10.1007/s00466-019-01736-w
  28. M. Conti, S. Marconi, G. Muscogiuri, M. Guglielmo, A. Baggiano, G. Italiano, M.E. Mancini, F. Auricchio, D. Andreini, M.G. Rabbat, A.I. Guaricci, G. Fassini, A. Gasparetti, F. Costa, C. Tondo, A. Maltagliati, M. Pepi, G. Potone. “Left atrial appendage closure guided by 3D computed tomography printing technology: A case control study”, Journal of Cardiovascular Computed Tomography (2019) – DOI: 10.1016/j.jcct.2018.10.024
  29. F. Auricchio, A. Bacigalupo, L. Gambarotta, M. Lepidi, S. Morganti, F. Vadalà. “A novel layered topology of auxetic materials based on the tetrachiral honeycomb microstructure”, Materials and Design (2019) – DOI: 10.1016/j.matdes.2019.107883Open Access article under the CC BY-NC-ND license
  30. S. Marconi, E. Negrello, V. Mauri, L. Pugliese, A. Peri, F. Argenti, F. Auricchio, A. Pietrabissa. “Toward the improvement of 3D-printed vessels’ anatomical models for robotic surgery training”, International Journal of Artificial Organs (2019) – DOI: 10.1177/0391398819852957
  31. V. Fantini, M. Bordoni, F. Scocozza, M. Conti, E. Scarian, S. Carelli, A.M.Di Giulio, S. Marconi, O. Pansarasa, F. Auricchio, C. Cereda. “Bioink Composition and Printing Parameters for 3D Modeling Neural Tissue”, Cells (2019) – DOI: 10.3390/cells8080830Open Access article under the CC BY license
  32. F. Auricchio, M. Conti, R.M. Romarowski. “Usefulness of computational fluid dynamics in penetrating aortic ulcer”, Annals of Cardiothoracic Surgery, vol. 8 (4), pp. 492-493 (2019) – DOI: 10.21037/acs.2019.06.08Open Access article under the CC BY-NC-ND license
  33. P. Fedeli, A. Frangi, F. Auricchio, A. Reali. “Phase-field modeling for polarization evolution in ferroelectric materials via an isogeometric collocation method”, Computer Methods in Applied Mechanics and Engineering (2019) – DOI: 10.1016/j.cma.2019.04.001
  34. G. Spinella, A. Finotello, M. Conti, E. Faggiano, V. Gazzola, F. Auricchio, N. Chakfé, D. Palombo, B. Pane. “Assessment of geometrical remodelling of the aortic arch after hybrid treatment”, European Journal of Cardio-Thoracic Surgery (2019) – DOI: 10.1093/ejcts/ezy397
  35. M.M. Marrocco-Trischitta, T.M. van Bakel, R.M. Romarowski, H.W. de Beaufort, M. Conti, J.A. van Herwaarden, F.L. Moll, F. Auricchio, S. Trimarchi. “The Modified Arch Landing Areas Nomenclature identifies hostile zones for endograft deployment: A confirmatory biomechanical study in patients treated by thoracic endovascular aortic repair”, European Journal of Cardio-thoracic Surgery (2018) – DOI: 10.1093/ejcts/ezy409
  36. S. Kollmannsberger, E. Rank, F. Auricchio, P. Steinmann. “Simulation for additive manufacturing”, Computers and Mathematics with Applications (2019) – DOI: 10.1016/j.camwa.2019.08.020
  37. M.L. Mazzucchelli, A. Reali, S. Morganti, R.J. Angel, M. Alvaro. “Elastic geobarometry: relaxation of elastically anisotropic inclusions”, Lithos (2019) – DOI: 10.1016/j.lithos.2019.105218Open Access article under the CC BY license
  38. C. Garoni, H. Speleers, S.-E. Ekström, A. Reali, S. Serra-Capizzano, T.J. R. Hughes. “Symbol-based analysis of finite element and isogeometric B-spline discretizations of eigenvalue problems: Exposition and review”, Computational Methods in Engineering (2019) – DOI: 10.1007/s11831-018-9295-y
  39. G. Lorenzo, V.M. Pérez-García, A. Mariño, L.A. Pérez-Romasanta, A. Reali, H. Gomez. “Mechanistic modelling of PSA dynamics shows potential for personalised prediction of radiation therapy outcome”, Journal of the Royal Society Interface (2019) – DOI: 10.1098/rsif.2019.0195
  40. A. Patton, J-E Dufour, P. Antolin, A. Reali. “Fast and accurate elastic analysis of laminated composite plates via isogeometric collocation and an equilibrium-based stress recovery approach”, Composite Structures (2019) – DOI: 10.1016/j.compstruct.2019.111026
  41. L. Leonetti, D. Magisano, A. Madeo, G. Garcea, J. Kiendl, A. Reali. “A simplified Kirchhoff-Love large deformation model for elastic shells and its effective isogeometric formulation”, Computer Methods in Applied Mechanics and Engineering (2019) – DOI: 10.1016/j.cma.2019.05.025
  42. M. Carraturo, C. Giannelli, A. Reali, R. Vázquez. “Suitably graded THB-spline refinement and coarsening: Towards an adaptive isogeometric analysis of additive manufacturing processes”, Computer Methods in Applied Mechanics and Engineering (2019) – DOI: 10.1016/j.cma.2019.01.044
  43. T. Horger, A. Reali, B. Wohlmuth, L. Wunderlich. “A hybrid isogeometric approach on multi-patches with applications to Kirchhoff plates and eigenvalue problems”, Computer Methods in Applied Mechanics and Engineering (2019) – DOI: 10.1016/j.cma.2018.12.038
  44. A. Viguerie, A. Veneziani. “Deconvolution-based stabilization of the incompressible Navier–Stokes equations”, Journal of Computational Physics (2019) – DOI: 10.1016/j.jcp.2018.11.024
  45. M. Conti, S. Marconi. “Three-dimensional printing for biomedical applications”, International Journal of Artificial Organs (2019) – DOI: 10.1177/0391398819860846
  46. P. Giovannelli, M. Di Donato, F. Auricchio, G. Castoria, A. Migliaccio. “Androgens Induce Invasiveness of Triple Negative Breast Cancer Cells Through AR/Src/PI3-K Complex Assembly”, Scientific Reports (2019) – DOI: 10.1038/s41598-019-41016-4

 

Papers in international conference proceedings

  1. V.M. Belvroy, R.M. Romarowski, J.A. van Herwaarden, J. Bismuth, F. Auricchio, F.L. Moll, S. Trimarchi. “Computational Fluid Dynamics in Descending Thoracic Aortic Aneurysm: Tortuosity Associated With High Displacement Forces”, Journal of Vascular Surgery (2019) – DOI: 10.1016/j.jvs.2019.01.022
  2. C. Tomassoni, L. Silvestri, N. Delmonte, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “A New Class of Doublet Based on Slotted Slant Ridge in Additive Manufacturing Technology”, IMWS-AMP 2019 – 2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (2019) – DOI: 10.1109/IMWS-AMP.2019.8880093
  3. L. Casagrande, A. Bonati, A. Occhiuzzi, F. Auricchio. “A pseudoelastic floor isolation system for hospital seismic retrofitting”, COMPDYN Proceedings (2019) – DOI: 10.7712/120119.7300.19056
  4. P. Castillo, V. Leitão, F. Auricchio, “Modeling dynamic loading rate effects in concrete specimens and crack branching at a weak interface in a PMMA plate using peridynamics”, COMPDYN Proceedings (2019) – DOI: https:10.7712/120119.7246.18507
  5. G. Lorenzo, T.J.R. Hughes, P. Dominguez-Frojan, A. Reali, H. Gomez. “Computer simulations suggest that prostate enlargement due to benign prostatic hyperplasia mechanically impedes prostate cancer growth”, Proceedings of the National Academy of Sciences of the United States of America (2019) – DOI: 10.1073/pnas.1815735116
  6. C. Tomassoni, L. Silvestri, N. Delmonte, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “Different strategies for the additive manufacturing of slotted slant ridge filtering doublet“, 2019 IEEE MTT-S International Microwave and RF Conference (IMARC) (2019) – DOI: 10.1109/IMaRC45935.2019.9118774
  7. G. Alaimo, M. Carraturo, E. Rocca, A. Reali, F. Auricchio. “Functionally graded material design for plane stress structures using phase field method”, Second International Conference on Simulation for Additive Manufacturing (SIM-AM 2019) (2019)
  8. J.L. Sablayrolles, S.S.A. Singh, D. Attias, L. Mazzocchi, S. Morganti, C.G. Mihos, F. Auricchio, F. Nappi. “Biomechanics of the reduced leaflet motion and thrombosis after transcatheter aortic valve replacement“, Journal of the American College of Cardiology (2019) DOI: 10.1016/S0735-1097(19)31987-4
  9. G. Ceccarelli, F. Scocozza, M. Conti, F. Auricchio, G. Cusella, M. Sampaolesi, F.L. Ronzoni. “Skeletal muscle regenerative approach combining stem cells and 3D bioprinting”, Italian Journal of Anatomy and Embryology (2019)

 

Book Chapters

    1. E. Lanzarone, S. Marconi, M. Conti, F. Auricchio, I. Fassi, F. Modica, C. Pagano, G. Pourabdollahian. “Hospital Factory for Manufacturing Customised, Patient-Specific 3D Anatomo-Functional Models and Prostheses”, in “Factories of the Future”, Springer (2019) – DOI: 10.1007/978-3-319-94358-9_11Open Access under the CC BY license
    2. S. Morganti, M. Conti, A. Reali, F. Auricchio. Predictive Computational Models of Transcatheter Aortic Valve Implantation”, in “Transcatheter Aortic Valve Implantation – Clinical, Interventional and Surgical Perspectives”, Springer (2019) – DOI: 10.1007/978-3-030-05912-5_4
    3. T.M.J. Van Bakel, F.J.H. Nauta, M. Conti, R. Romarowski, S. Morganti, J.A. Van Herwaarden, C.A. Figueroa, F. Auricchio, S. Trimarchi. Novel understanding on thoracic aortic diseases from bioengineering concepts”, in “Surgical Management of Aortic Pathology: Current Fundamentals for the Clinical Management of Aortic Disease”, Springer (2019) – DOI: 10.1007/978-3-7091-4874-7_9

Papers in international journals

  1. D. Asprone, F. Auricchio, C. Menna, V. Mercuri. “3D printing of reinforced concrete elements: Technology and design approach”, Construction and Building Materials (2018) – DOI: 10.1016/j.conbuildmat.2018.01.018
  2. A. Sibileau, A. García-González, F. Auricchio, S. Morganti, P. Díez. “Explicit parametric solutions of lattice structures with Proper Generalized Decomposition (PGD): Applications to the design of 3D-printed architectured materials, Computational Mechanics (2018) – DOI: 10.1007/s00466-017-1534-9
  3. S. Morganti, C. Callari, F. Auricchio, A. Reali. Mixed isogeometric collocation methods for the simulation of poromechanics problems in 1D”, Meccanica (2018) – DOI: 10.1007/s11012-018-0820-8
  4. F. Xu, S. Morganti, R. Zakerzadeh, D. Kamensky, F. Auricchio, A. Reali, T.J.R. Hughes, M.S. Sacks, M.C. Hsu. “A framework for designing patient-specific bioprosthetic heart valves using immersogeometric fluid–structure interaction analysis”, International Journal for Numerical Methods in Biomedical Engineering (2018) – DOI: 10.1002/cnm.2938
  5. H.W.L. de Beaufort, E. Cellitti, Q.M. de Ruiter, M. Conti, E. Cellitti, S. Trimarchi, F. Moll, C. Hazenberg, J. A. van Herwaarden. “Midterm outcomes and evolution of gutter area after endovascular aneurysm repair with the chimney graft procedure”, Journal of Vascular Surgery (2018) – DOI: 10.1016/j.jvs.2017.04.067
  6. H.W.L. de Beaufort, A. Ferrara, M. Conti, F.L. Moll, J.A. van Herwaarden, C.A. Figueroa, J. Bismuth, F. Auricchio, S. Trimarchi. “Comparative Analysis of Porcine and Human Thoracic Aortic Stiffness”, European Journal of Vascular and Endovascular Surgery (2018) – DOI: 10.1016/j.ejvs.2017.12.014
  7. A. Ferrara, P. Totaro, S. Morganti, F. Auricchio. “Effects of clinico-pathological risk factors on in-vitro mechanical properties of human dilated ascending aorta”, Journal of the Mechanical Behavior of Biomedical Materials (2018) – DOI: 10.1016/j.jmbbm.2017.08.032
  8. X. Zou, M. Conti, P. Diez, F. Auricchio. “A nonintrusive proper generalized decomposition scheme with application in biomechanics”, International Journal for Numerical Methods in Engineering (2018) – DOI: 10.1002/nme.5610
  9. N.G. Ceffa, M. Bouzin, L. D’Alfonso, L. Sironi, C.A. Marquezin, F. Auricchio, S. Marconi, G. Chirico, M. Collin. “Spatiotemporal Image Correlation Analysis for 3D Flow Field Mapping in Microfluidic Devices”, Analytical Chemistry (2018) – DOI: 10.1021/acs.analchem.7b04641
  10. J.E. Dufour, P. Antolin, G. Sangalli, F. Auricchio, A. Reali. “A cost-effective isogeometric approach for composite plates based on a stress recovery procedure”, Composites Part B: Engineering (2018) – DOI: 10.1016/j.compositesb.2017.11.026
  11. E.M. Marone, L.F. Rinaldi, S. Marconi, M. Conti, F. Auricchio, A. Pietrabissa, A. Argenteri. “A 3-D printed patient-specific model to assist decision making in endovascular treatment of thoraco-abdominal aortic aneurysm”, Journal of Cardiovascular Surgery (2018) – DOI: 10.23736/S0021-9509.17.10199-0
  12. A. Montanino, D. Asprone, A. Reali, F. Auricchio. “Modified Finite Particle Methods for Stokes problems”, Computational Particle Mechanics (2018) – DOI: 10.1007/s40571-017-0159-2
  13. G. Alaimo, F. Auricchio, I. Bianchini, E. Lanzarone. “Applying functional principal components to structural topology optimization”, International Journal for Numerical Methods in Engineering (2018) – DOI: 10.1002/nme.5801
  14. R.M. Romarowski, A. Lefieux, S. Morganti, A. Veneziani, F. Auricchio. “Patient-specific CFD modelling in the thoracic aorta with PC-MRI–based boundary conditions: A least-square three-element Windkessel approach”, International Journal for Numerical Methods in Biomedical Engineering (2018) – DOI: 10.1002/cnm.3134
  15. M. Peigney, G. Scalet, F. Auricchio. “A time integration algorithm for a 3D constitutive model for SMAs including permanent inelasticity and degradation effects”, International Journal for Numerical Methods in Engineering (2018) – DOI: 10.1002/nme.5835
  16. G.M. Formato, M. Lo Rito, F. Auricchio, A. Frigiola, M. Conti. “Aortic Expansion Induces Lumen Narrowing in Anomalous Coronary Arteries: A Parametric Structural Finite Element Analysis”, Journal of Biomechanical Engineering (2018) – DOI: 10.1115/1.4040941
  17. L. Pugliese, S. Marconi, E. Negrello, V. Mauri, A. Peri, V. Gallo, F. Auricchio, A. Pietrabissa. “The clinical use of 3D printing in surgery”, Updates in Surgery (2018) – DOI:10.1007/s13304-018-0586-5
  18. J. Kiendl, F. Auricchio, A. Reali. “A displacement-free formulation for the Timoshenko beam problem and a corresponding isogeometric collocation approach”, Meccanica (2018) – DOI: 10.1007/s11012-017-0745-7
  19. P.F. Espin-Lopez, M. Pasian, G. Alaimo, S. Marconi, F. Auricchio, V. Heinänen, J. Järveläinen. “3D-printed Antenna for Snowpack Monitoring”, IEEE Antennas and Wireless Propagation Letters (2018) – DOI: 10.1109/LAWP.2018.2870550
  20. E.M. Marone, F. Auricchio, S. Marconi, M. Conti, L.F. Rinaldi, A. Pietrabissa, A. Argenteri. “Effectiveness of 3D printed models in the treatment of complex aortic disease”, Journal of Cardiovascular Surgery (2018) – DOI: 10.23736/S0021-9509.18.10324-7
  21. S. Marconi, E. Lanzarone, G.HW. van Bogerijen, M. Conti, F. Secchi, S. Trimarchi, F. Auricchio. “A compliant aortic model for in vitro simulations: Design and manufacturing process”, Medical Engineering and Physics (2018) – DOI: 10.1016/j.medengphy.2018.04.022
  22. M. Gallo, A. Putzu, M. Conti, G. Pedrazzini, S. Demertzis, E. Ferrari. “Embolic protection devices for transcatheter aortic valve replacement”, European Journal of Cardio-Thoracic Surgery (2018) – DOI: 10.1093/ejcts/ezx457
  23. G. Spinella, A. Finotello, E. Faggiano, B. Pane, M. Conti, V. Gazzola, F. Auricchio, D. Palombo. “Midterm Follow-up Geometrical Analysis of Thoracoabdominal Aortic Aneurysms Treated with Multilayer Flow Modulator”, Annals of Vascular Surgery (2018) – DOI: 10.1016/j.avsg.2018.04.034
  24. T. Hoang, C.V. Verhoosel, F. Auricchio, E.H. van Brummelen, A. Reali. “Skeleton-stabilized IsoGeometric Analysis: High-regularity interior-penalty methods for incompressible viscous flow problems, Computer Methods in Applied Mechanics and Engineering (2018) – DOI: 10.1016/j.cma.2018.03.034
  25. G. Scalet, F. Auricchio. “Computational methods for elastoplasticity: an overview of conventional and less-conventional approaches”, Archives of Computational Methods in Engineering (2018) – DOI: 10.1007/s11831-016-9208-x
  26. F. Auricchio, M. Ferretti, A. Lefieux, M. Musci, A. Reali, S. Trimarchi, A. Veneziani. “Parallelizing a finite element solver in computational hemodynamics: a black box approach”, International Journal of High Performance Computing Applications (2018) – DOI: 10.1177%2F1094342016649245
  27. R.M. Romarowski, M. Conti, S. Morganti, V. Grassi, M.M. Marrocco-Trischitta, S. Trimarchi, F. Auricchio. “Computational simulation of TEVAR in the ascending aorta for optimalendograft selection: A patient-specific case study”, Computers in Biology and Medicine (2018) – DOI: 10.1016/j.compbiomed.2018.10.014
  28. F. Nappi, L. Mazzocchi, S.S. Avtaar Singh, S. Morganti, J-L. Sablayrolles, C. Acar, F. Auricchio. “Complementary Role of the Computed Biomodelling through Finite Element Analysis and Computed Tomography for Diagnosis of Transcatheter Heart Valve Thrombosis”, BioMed Research International (2018) – DOI: 10.1155/2018/1346308Open Access article under the CC BY license
  29. A. Nenna, S.S. Avtaar Singh, S. Morganti, L. Mazzocchi, F. Auricchio, M. Chello, F. Nappi. “Transcatheter Technologies for Valvular Replacement: an Update”, Surgical Technology International (2018) – PMID: 29689593
  30. G. Scalet, C. Menna, A. Constantinescu, F. Auricchio. “A computational approach based on a multiaxial fatigue criterion combining phase transformation and shakedown response for the fatigue life assessment of Nitinol stents”, Journal of Intelligent Material Systems and Structures (2018) – DOI: 10.1177/1045389X18798957
  31. G. Scalet, S. Pandini, M. Messori, M. Toselli, F. Auricchio. “A one-dimensional phenomenological model for the two-way shape-memory effect in semi-crystalline networks”, Polymer (2018) – DOI: 10.1016/j.polymer.2018.10.027
  32. A. Viguerie, A. Veneziani. “Deconvolution-based stabilization of the incompressible Navier-Stokes equations”, Journal of Computational Physics (2018) – DOI: 10.1016/j.jcp.2018.11.024
  33. G. Balduzzi, M. Aminbaghai, F. Auricchio, J. Füssl. “Planar Timoshenko-like model for multilayer non-prismatic beams”, International Journal of Mechanics and Materials in Design (2018) – DOI: 10.1007/s10999-016-9360-3Open Access article under the CC BY license
  34. P. Canzi, S. Marconi, M. Manfrin, M. Magnetto, C. Carelli, A.M. Simoncelli, D. Fresa, M. Beltrame, F. Auricchio, M. Benazzo. “From CT scanning to 3D printing technology: a new method for the preoperative planning of a transcutaneous bone-conduction hearing device”, Acta Otorhinolaryngologica Italica (2018) – DOI: 10.14639/0392-100X-1625
  35. T.M. van Bakel, R.M. Romarowski, S. Morganti, J.A. van Herwaarden, F.L. Moll, H.W. de Beaufort, M.M. Marrocco-Trischitta, F. Secchi, M. Conti, F. Auricchio, S. Trimarchi. “Blood Flow after Endovascular Repair in the Aortic Arch: A Computational Analysis”, Aorta (2018) – DOI: 10.1055/s-0039-1683771Open Access article under the CC BY license
  36. M.L. Mazzucchelli, P. Burnley, R.J. Angel, S. Morganti, M.C. Domeneghetti, F. Nestola, M. Alvaro. “Elastic geothermobarometry: Corrections for the geometry of the host-inclusion system”, Geology (2018) – DOI: 10.1130/G39807.1Open Access article under the CC BY license
  37. P. Canzi, M. Magnetto, S. Marconi, P. Morbini, S. Mauramati, F. Aprile, I. Avato, F. Auricchio, M. Benazzo. “New frontiers and emerging applications of 3D printing in ENT surgery: A systematic review of the literature”, Acta Otorhinolaryngologica Italica (2018) – DOI: 10.14639/0392-100X-1984
  38. M.M. Marrocco-Trischitta, T.M. van Bakel, R.M. Romarowski, H.W. de Beaufort, M. Conti, J.A. van Herwaarden, F.L. Moll, F. Auricchio, S. Trimarchi. “The Modified Arch Landing Areas Nomenclature (MALAN) Improves Prediction of Stent Graft Displacement Forces: Proof of Concept by Computational Fluid Dynamics Modelling”, European Journal of Vascular and Endovascular Surgery (2018) – DOI: 10.1016/j.ejvs.2017.12.019
  39. A. Desyatova, J. MacTaggart, R. Romarowski, W. Poulson, M. Conti, A. V. Kamenskiy. “Effect of aging on mechanical stresses, deformations, and hemodynamics in human femoropopliteal artery due to limb flexion”, Biomechanics and Modeling in Mechanobiology (2018) – DOI: 10.1007/s10237-017-0953-z
  40. J.A. Evans, R.R. Hiemstra, T.J.R. Hughes, A. Reali. “Explicit higher-order accurate isogeometric collocation methods for structural dynamics”, Computer Methods in Applied Mechanics and Engineering (2018) – DOI: 10.1016/j.cma.2018.04.008
  41. D. D’Angella, S. Kollmannsberger, E. Rank, A. Reali. “Multi-level Bézier extraction for hierarchical local refinement of Isogeometric Analysis”, Computer Methods in Applied Mechanics and Engineering (2018) – DOI: 10.1016/j.cma.2017.08.017
  42. S.F. Hosseini, A. Hashemian, A. Reali. “On the application of curve reparameterization in isogeometric vibration analysis of free-from curved beams”, Computers and Structures (2018) – DOI: 10.1016/j.compstruc.2018.08.009
  43. S. Marfia, A. Pandolfi, A. Reali. “Preface to: Novel computational approaches to old and new problems in mechanics”, Meccanica (2018) – DOI: 10.1007/s11012-018-0838-y
  44. N. Campomenosi, M.L. Mazzucchelli, B. Mihailova, M. Scambelluri, R.J. Angel, F. Nestola, A. Reali, M. Alvaro. “How geometry and anisotropy affect residual strain in host-inclusion system: Coupling experimental and numerical approaches”, American Mineralogist (2018) – DOI: 10.2138/am-2018-6700CCBYOpen Access article under the CC BY license
  45. F. Auricchio, M. Fedele, M. Ferretti, A.G. Lefieux, R.M. Romarowski, L. Santangelo, A. Veneziani. “Benchmarking a hemodynamics application on Intel based HPC systems”, Advances in Parallel Computing (2018) – DOI: 10.3233/978-1-61499-843-3-57

 

Papers in international conference proceedings

  1. E. Massoni, M. Guareschi, M. Bozzi, L. Perregrini, U. Tamburini Anselmi, G. Alaimo, S. Marconi, F. Auricchio, C. Tomassoni. “3D Printing and Metalization Methodology for High Dielectric Resonator Waveguide Microwave Filters”, 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP) (2018) – DOI: 10.1109/IMWS-AMP.2017.8247417
  2. S. Marconi, G. Alaimo, V. Mauri, M. Torre, F. Auricchio. “Impact of graphene reinforcement on mechanical properties of PLA 3D printed materials”, 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP) (2018) – DOI: 10.1109/IMWS-AMP.2017.8247414
  3. G.M. Rocco, M. Bozzi, S. Marconi, G. Alaimo, F. Auricchio, D. Schreurs. “3D-Printed Microfluidic Sensor in Substrate Integrated Waveguide Technology”, 2018 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP) (2018) – DOI: 10.1109/IMWS-AMP.2018.8457168
  4. N. Inverardi, S. Pandini, F. Bignotti, G. Scalet, S. Marconi, F. Auricchio. “Temperature-memory effect in 3D printed photopolymers with broad glass transition”, AIP Conference Proceedings (2018) – DOI: 10.1063/1.5046008
  5. S. Di Meo, S. Morganti, L. Pasotti, M. Conti, M. Pasian, G. Matrone. “Preliminary Experimental Characterization of Gelatin-Based Tissue-Mimicking Materials for Realistic Breast Phantoms aimed at Microwave Applications”, 2018 EMF-Med 1st World Conference on Biomedical Applications of Electromagnetic Fields (EMF-Med) (2018) – DOI: 10.23919/EMF-MED.2018.8526075
  6. S. Di Meo, E. Massoni, L. Silvestri, J. Obbad, M. Pasian, D. Dondi, M. Bozzi, L. Perregrini, G. Alaimo, S. Marconi, F. Auricchio. “Dielectric characterization of material for 3D-printed breast phantoms up to 50 GHz: Preliminary experimental results”, 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, IMWS-AMP 2017 (2018) – DOI: 10.1109/IMWS-AMP.2017.8247371

 

Book Chapters

  1. M. Conti, S. Morganti, A. Finotello, R.M. Romarowski, A. Reali, F. Auricchio. “Aortic endovascular surgery”, in “SEMA SIMAI Springer Series”, Springer (2018) – DOI: 10.1007/978-3-319-96649-6_7
  2. F. Auricchio, M. Conti, A. Lefieux, S. Morganti, A. Reali, G. Rozza, A. Veneziani. “Computational methods in cardiovascular mechanics”, in “Cardiovascular Mechanics”, M.R. Labrosse. CRC – Taylor & Francis (2018)

Papers in international journals

  1. S. Marconi, E. Lanzarone, H. De Beaufort, M. Conti, S. Trimarchi, F. Auricchio. “A novel insight into the role of entry tears in type B aortic dissection: pressure measurements in an in vitro model”, International Journal of Artificial Organs (2017) – DOI: 10.5301/ijao.5000627
  2. G. Balduzzi, S. Morganti, F. Auricchio, A. Reali. “Non-prismatic Timoshenko-like beam model: Numerical solution via isogeometric collocation”, Computers & Mathematics with Applications (2017) – DOI: 10.1016/j.camwa.2017.04.025Open Access article under the CC BY license
  3. G. Rigamonti, M. Guardamagna, V. Bello, S. Marconi, F. Auricchio, S. Merlo. “Flow-through micro-capillary refractive index sensor based on T/R spectral shift monitoring”, Biomedical Optics Express (2017) – DOI: 10.1364/BOE.8.004438 – Open Access article under the CC BY license
  4. F.J.H. Nauta, H.W.L. de Beaufort, M. Conti, S. Marconi, A.V. Kamman, A. Ferrara, J.A. van Herwaarden, F.L. Moll, F. Auricchio, S. Trimarchi. “Impact of thoracic endovascular aortic repair on radial strain in an ex vivo porcine model”, European Journal of Cardio-Thoracic Surgery (2017) – DOI: 10.1093/ejcts/ezw393
  5. R. Dorati, A. De Trizio, S. Marconi, A. Ferrara, F. Auricchio, I. Genta, T. Modena, M. Benazzo, A. Benazzo, G. Volpato, B.Conti. “Design of a Bioabsorbable Multilayered Patch for Esophagus Tissue Engineering”, Macromolecular Bioscience (2017) – DOI: 10.1002/mabi.201600426
  6. E. Massoni, L. Silvestri, G. Alaimo, S. Marconi, M. Bozzi, L. Perregrini, F. Auricchio. “3-D Printed Substrate Integrated Slab Waveguide for Single-Mode Bandwidth Enhancement”, IEEE Microwave and Wireless Components Letters (2017) – DOI: 10.1109/LMWC.2017.2701323
  7. F.J.H. Nauta, G.H.W. Van Bogerijen, M. Conti, C. Trentin, F.L. Moll, J.A. Van Herwaarden, F. Auricchio, S. Trimarchi. “Impact of Thoracic Endovascular Repair on Pulsatile Aortic Strain in Acute Type B Aortic Dissection”, Aorta (2017) – DOI: 10.12945/j.aorta.2017.16.042 – Open Access article under the CC BY license
  8. H.W.L. De Beaufort, M. Coda, M. Conti, T.M.J. Van Bakel, F.J.H. Nauta, E. Lanzarone, F.L. Moll, J.A. Van Herwaarden, F. Auricchio, S. Trimarchi. “Changes in aortic pulse wave velocity of four thoracic aortic stent grafts in an ex vivo porcine model”, Plos One (2017) – DOI: 10.1371/journal.pone.0186080 – Open Access article under the CC BY license
  9. G. Alaimo, F. Auricchio, M. Conti, M. Zingales. “Multi-objective optimization of nitinol stent design”, Medical Engineering & Physics (2017) – DOI: 10.1016/j.medengphy.2017.06.026
  10. F. Auricchio, G. Scalet, P. Wriggers. “Fiber-reinforced materials: finite elements for the treatment of the inextensibility constraint”, Computational Mechanics (2017) – DOI: 10.1007/s00466-017-1437-9
  11. H.W.L. De Beaufort, M. Conti, A.V. Kamman, F.J.H. Nauta, E. Lanzarone, F.L. Moll, J.A. Van Herwaarden, F. Auricchio, S. Trimarchi. “Stent-Graft Deployment Increases Aortic Stiffness in an Ex Vivo Porcine Model”, Annals of Vascular Surgery (2017) – DOI: 10.1016/j.avsg.2017.04.024
  12. H.W.L. de Beaufort, F.J.H. Nauta, M. Conti, E. Cellitti, C. Trentin, E. Faggiano, G.H.W. van Bogerijen, C.A. Figueroa, F.L. Moll, J.A. van Herwaarden, F. Auricchio, S. Trimarchi. “Extensibility and Distensibility of the Thoracic Aorta in Patients with Aneurysm”, European Journal of Vascular and Endovascular Surgery (2017) – DOI: 10.1016/j.ejvs.2016.11.018
  13. G. Alaimo, S. Marconi, L. Costato, F. Auricchio. “Influence of meso-structure and chemical composition on FDM 3D-printed parts”, Composites Part B: Engineering (2017) – DOI: 10.1016/j.compositesb.2017.01.019
  14. S. Marconi, L. Pugliese, M. Botti, A. Peri, E. Cavazzi, F. Auricchio, A. Pietrabissa. “Value of 3D-printing for the comprehension of surgical anatomy”, Surgical Endoscopy (2017) – DOI: 10.1007/s00464-017-5457-5
  15. G. Scalet, F. Auricchio, M. Conti. “Computational analysis of advanced shape-memory alloy devices through a robust modeling framework”, Shape Memory and Superelasticity (2017) – DOI: 10.1007/s40830-017-0102-7
  16. M. Conti, M. Marconi, G. Campanile, A. Reali, D. Adami, R. Berchiolli, F. Auricchio. “Patient-specific finite element analysis of popliteal stenting”, Meccanica (2017) – DOI: 10.1007/s11012-016-0452-9
  17. T. Hoang, C.V. Verhoosel, F. Auricchio, E.H. van Brummelen, A. Reali. Mixed Isogeometric Finite Cell Methods for the Stokes Problem”, Computer Methods in Applied Mechanics and Engineering (2017) – DOI: 10.1016/j.cma.2016.07.027
  18. O. Bas, D. D’Angella, J.G. Baldwin, N.J. Castro, F.M. Wunner, N.T. Saidy, S. Kollmannsberger, A. Reali, E. Rank, E.M. De-Juan-Pardo, D.W. Hutmacher. “An Integrated Design, Material, and Fabrication Platform for Engineering Biomechanically and Biologically Functional Soft Tissues”, CS Applied Materials & Interfaces (2017) – DOI: 10.1021/acsami.7b08617
  19. L. Heltai, J. Kiendl, A. DeSimone, A. Reali. “A natural framework for isogeometric fluid-structure interaction based on BEM-shell coupling”, Computer Methods in Applied Mechanics and Engineering (2017) – DOI: 10.1016/j.cma.2016.08.008
  20. J. Niiranen, J. Kiendl, A. H. Niemi, A. Reali. “Isogeometric analysis for sixth-order boundary value problems of gradient-elastic Kirchhoff plates”, Computer Methods in Applied Mechanics and Engineering (2017) – DOI: 10.1016/j.cma.2016.07.008
  21. S. Perotto, A. Reali, P. Rusconi, A. Veneziani. “HIGAMod: A Hierarchical IsoGeometric Approach for MODel reduction in curved pipes”, Computers & Fluids (2017) – DOI: 10.1016/j.compfluid.2016.04.014
  22. H. Casquero, L. Liu, Y. Zhang, A. Reali, J. Kiendl, H. Gomez. “Arbitrary-degree T-splines for isogeometric analysis of fully nonlinear Kirchhoff-Love shells”, Computer-Aided Design (2017) – DOI: 10.1016/j.cad.2016.08.009
  23. F. Auricchio, A. Ferrara, E. Lanzarone, S. Morganti, P. Totaro. “A Regression Method Based on Noninvasive Clinical Data to Predict the Mechanical Behavior of Ascending Aorta Aneurysmal Tissue”, IEEE Transactions on Biomedical Engineering (2017) – DOI: 10.1109/TBME.2016.2645762
  24. C.A. Di Buduo, P.M. Soprano, L. Tozzi, S. Marconi, F. Auricchio, D.L. Kaplan, A. Balduini. “Modular flow chamber for engineering bone marrow architecture and function”, Biomaterials (2017) – DOI: 10.1016/j.biomaterials.2017.08.006
  25. J. Schroeder, N. Viebahn, P. Wriggers, F. Auricchio, K. Steeger. “On the stability analysis of hyperelastic boundary value problems using three- and two-field mixed finite element formulations”, Computational Mechanics (2017) – DOI: 10.1007/s00466-017-1415-2
  26. A. Finotello, S. Morganti, F. Auricchio. “Finite element analysis of TAVI: Impact of native aortic root computational modeling strategies on simulation outcomes”, Medical Engineering and Physics (2017) – DOI: 10.1016/j.medengphy.2017.06.045
  27. F.J.H. Nauta, G.H.W. van Bogerjen, C. Trentin, M. Conti, F. Auricchio, F.L. Moll, J.A. van Herwaarden, S. Trimarchi. “Impact of Thoracic Endovascular Aortic Repair on Pulsatile Circumferential and Longitudinal Strain in Patients With Aneurysm”, Journal of Endovascular Therapy (2017) – DOI: 10.1177/1526602816687086
  28. F. Auricchio, A. Greco, G. Alaimo, V. Giacometti, S. Marconi, V. Mauri. “3D Printing technology for buildings’ accessibility: the tactile map for the MTE Museum in Pavia”, Journal of Civil Engineering and Architecture (2017) – DOI: 10.17265/1934-7359/2017.08.002

Papers in international conference proceedings

  1. E. Massoni, P.F. Espin-Lopez, M. Pasian, M. Bozzi, L. Perregrini, G. Alaimo, S. Marconi, F. Auricchio. “3D-printed Chalk Powder for Microwave Devices: Experimental Results for a NRD-guide in Ku-Band”, 47th European Microwave Conference (EuMC2017) (2017) – DOI: 10.23919/EuMC.2017.8230900
  2. G. Alaimo, F. Auricchio, H. Giberti, S. Marconi, S. Morganti. “Additive manufacturing for a low-cost biaxial testing machine”, AIMETA 2017 – Proceedings of the XXIII Conference of the Italian Association of Theoretical and Applied Mechanics (2017)
  3. G. Scalet, E. Boatti, M. Ferraro, V. Mercuri, D.J. Hartl, F. Auricchio. “Explicit finite element implementation of a shape memory alloy constitutive model and associated analyses”, Computational Plasticity XIV: Fundamentals And Applications,  (2017)
  4. E. Massoni, P.F. Espin-Lopez, M. Pasian, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, F. Auricchio. “Additive Manufacturing of a Chalk Powder NRD 3-Port Junction via Binder Jetting Technology”, IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017) (2017) – DOI: 10.1109/IMWS-AMP.2017.8247370
  5. Z. Yosibash, E. Rank, A. Düster, A. Reali. “HOFEIM 2016”, Computers and Mathematics with Applications (2017) – DOI: 10.1016/j.camwa.2017.07.014
  6. G. Balduzzi, G. Alaimo, M. Aminbaghai, F. Auricchio. “A simple and effective timoshenko-like model for beams with complex geometry and variable infill”, Simulation for Additive Manufacturing 2017, Sinam 2017 (2017)
  7. L. Casagrande, A. Bonati, F. Auricchio, A. Occhiuzzi. “Dissipating effect of glazed curtain wall stick system installed on high-rise mega-braced frame-core buildings under nonlinear seismic excitation”, COMPDYN 2017 – Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (2017) – DOI: 10.7712/120117.5677.17166
  8. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl. “Non-prismatic thin-walled beams: Critical issues and effective modeling”, AIMETA 2017 – Proceedings of the 23rd Conference of the Italian Association of Theoretical and Applied Mechanics (2017)

Book Chapters

  1. G. Scalet, F. Auricchio. “Shape memory alloys: Constitutive modeling and engineering simulations”, in “Alloys and Intermetallic Compounds: From Modeling to Engineering”, Taylor & Francis Inc (2017) – DOI: 10.1201/9781315151618

Papers in international journals

  1. A. Ferrara, S. Morganti, P. Totaro, A. Mazzola, F. Auricchio. “Human dilated ascending aorta: Mechanical characterization via uniaxial tensile tests”, Journal of the Mechanical Behavior of Biomedical Materials (2016) – DOI: 10.1016/j.jmbbm.2015.08.021
  2. A. Pietrabissa, S. Marconi, A. Peri, L. Pugliese, E. Cavazzi, A. Vinci, M. Botti, F. Auricchio. “From CT scanning to 3-D printing technology for the preoperative planning in laparoscopic splenectomy”, Surgical Endoscopy and Other Interventional Techniques (2016) – DOI: 10.1007/s00464-015-4185-y
  3. A. Amendola, C.J. Smith, R. Goodall, F. Auricchio, L. Feo, G. Benzoni, F. Fraternali. “Experimental response of additively manufactured metallic pentamode materials confined between stiffening plates”, Composite Structures (2016) – DOI: 10.1016/j.compstruct.2016.01.091
  4. V. Sepe, F. Auricchio, S. Marfia, E. Sacco. “Homogenization techniques for the analysis of porous SMA”, Computational Mechanics (2016) – DOI: 10.1007/s00466-016-1259-1
  5. F. Auricchio, L.B. Da Veiga, J. Kiendl, C. Lovadina, A. Reali. “Isogeometric collocation mixed methods for rods”, Discrete and Continuous Dynamical Systems – Series S (2016) – DOI: 10.3934/dcdss.2016.9.33
  6. F. Auricchio, A. Constantinescu, M. Conti, G. Scalet. “Fatigue of Metallic Stents: From Clinical Evidence to Computational Analysis”, Annals of Biomedical Engineering, vol. 44, pp. 287-301 (2016) – DOI: 10.1007/s10439-015-1447-8
  7. F. Auricchio, E. Boatti, A. Reali, U. Stefanelli. “Gradient structures for the thermomechanics of shape-memory materials”, Annals of Biomedical Engineering (2016) – DOI: 10.1016/j.cma.2015.11.005
  8. G. Scalet, F. Auricchio, D.J. Hartl. “Efficiency and effectiveness of implicit and explicit approaches for the analysis of shape-memory alloy bodies”, Journal of Intelligent Material Systems and Structures (2016) – DOI: 10.1177/1045389X15592483
  9. E. Achilli, A. Minguzzi, A. Visibile, C. Locatelli, A. Vertova, A. Naldoni, S. Rondinini, F. Auricchio, S. Marconi, M. Fracchia, P. Ghigna. “3D-printed photo-spectroelectrochemical devices for in situ and in operando X-ray absorption spectroscopy investigation”, Journal of Synchrotron Radiation (2016) – DOI: 10.1107/S1600577515024480
  10. F. Auricchio, A. Constantinescu, C. Menna, G. Scalet. “A shakedown analysis of high cycle fatigue of shape memory alloys”, International Journal of Fatigue (2016) – DOI: 10.1016/j.ijfatigue.2016.01.017
  11. R. Guerchais, G. Scalet, A. Constantinescu, F. Auricchio. “Micromechanical modeling for the probabilistic failure prediction of stents in high-cycle fatigue”, International Journal of Fatigue (2016) – DOI: 10.1016/j.ijfatigue.2016.02.026
  12. D. Gallo, A. Lefieux, S. Morganti, A. Veneziani, A. Reali, F. Auricchio, M. Conti, U. Morbiducci. “A Patient-Specific Follow Up Study of the Impact of Thoracic Endovascular Repair (TEVAR) on Aortic Anatomy and on Post-Operative Hemodynamics”, Computers and Fluids (2016) – DOI: 10.1016/j.compfluid.2016.04.025
  13. M. Conti, C. Long, M. Marconi, R. Berchiolli, Y. Bazilevs, A. Reali. “Carotid artery hemodynamics before and after stenting: A patient specific CFD study”, Computers and Fluids (2016) – DOI: 10.1016/j.compfluid.2016.04.006
  14. S. Trimarchi, A. Kamman, C. Lomazzi, S. Segreti, M. Cova, C. De Vincentiis, A. Frigiola, L. Menicanti, M. Marrocco-Trischitta, V. Grassi, S. Morganti, M. Conti, F. Auricchio, V. Rampoldi. “Activities at Thoracic Aortic Research Center, IRCCS Policlinico San Donato”, European Heart Journal Supplements (2016) – DOI: 10.1093/eurheartj/suw015
  15. F.J.H. Nauta, M. Conti, S. Marconi, A.V. Kamman, G. Alaimo, S. Morganti, A. Ferrara, J.A. van Herwaarden, F.L. Moll, F. Auricchio, S. Trimarchi. “An experimental investigation of the impact of thoracic endovascular aortic repair on longitudinal strain”, European Journal of Cardio-Thoracic Surgery (2016) – DOI: 10.1093/ejcts/ezw180
  16. G. Balduzzi, M. Aminbaghai, E. Sacco, J. Füssl, J. Eberhardsteiner, F. Auricchio. “Non-prismatic beams: A simple and effective Timoshenko-like model”, International Journal of Solids and Structures (2016) – DOI: 10.1016/j.ijsolstr.2016.02.017
  17. J. Kiendl, M. Ambati, L. De Lorenzis, H. Gomez, A. Reali. “Phase-field description of brittle fracture in plates and shells”, Computer Methods in Applied Mechanics and Engineering (2016) – DOI: 10.1016/j.cma.2016.09.011
  18. F. Auricchio, A. Lefieux, A. Reali, A. Veneziani. “A locally anisotropic fluid-structure interaction remeshing strategy for thin structures with application to a hinged rigid leaflet”, International Journal for Numerical Methods in Engineering (2016) – DOI: 10.1002/nme.5159
  19. S. Morganti, N. Brambilla, A.S. Petronio, A. Reali, F. Bedogni, F. Auricchio. “Prediction of patient-specific postoperative outcomes of TAVI procedure: The impact of the positioning strategy on valve performance”, Journal of Biomechanics (2016) – DOI: 10.1016/j.jbiomech.2015.10.048
  20. H. Casquero, L. Liu, Y. Zhang, A. Reali, H. Gomez. “Isogeometric collocation using analysis-suitable T-splines of arbitrary degree”, Computer Methods in Applied Mechanics and Engineering (2016) – DOI: 10.1016/j.cma.2015.12.014
  21. D. D’Angella, N. Zander, S. Kollmannsberger, F. Frischmann, E. Rank, A. Schröder, A. Reali. “Multi-Level hp-Adaptivity and Explicit Error Estimation”, Advanced Modeling and Simulation in Engineering Sciences (2016) – DOI: 10.1186/s40323-016-0085-5
  22. S. Marconi, L. Pugliese, M. Del Chiaro, R. Pozzi Mucelli, F. Auricchio, A. Pietrabissa. “An innovative strategy for the identification and 3D reconstruction of pancreatic cancer from CT images”, Updates in Surgery (2016) – DOI: 10.1007/s13304-016-0394-8
  23. E. Boatti, G. Scalet, F. Auricchio. “A three-dimensional finite-strain phenomenological model for shape-memory polymers: Formulation, numerical simulations, and comparison with experimental data”, International Journal of Plasticity (2016) – DOI: 10.1016/j.ijplas.2016.04.008
  24. M.J. Ashrafi, J. Arghavani, R. Naghdabadi, S. Sohrabpour, F. Auricchio. “Theoretical and numerical modeling of dense and porous shape memory alloys accounting for coupling effects of plasticity and transformation”, International Journal of Solids and Structures (2016) – DOI: 10.1016/j.ijsolstr.2016.03.003
  25. F. Secchi, M. Alì, E. Faggiano, P. M. Cannaò, M. Fedele, S. Tresoldi, G. Di Leo, F. Auricchio, F. Sardanelli. “Fractional flow reserve based on computed tomography: an overview”, European Heart Journal Supplements (2016) – DOI: 10.1093/eurheartj/suw014
  26. M.J. Ashrafi, J. Arghavani, R. Naghdabadi, F. Auricchio. “A three-dimensional phenomenological constitutive model for porous shape memory alloys including plasticity effects”, Journal of Intelligent Material Systems and Structures (2016) – DOI: 10.1177/1045389X15575085
  27. P. Wriggers, J. Schröder, F. Auricchio. “Finite element formulations for large strain anisotropic material with inextensible fibers”, Advanced Modeling and Simulation in Engineering Sciences (2016) – DOI: 10.1186/s40323-016-0079-3 – Open Access article under the CC BY license
  28. F. Auricchio, S. Marconi. “3D Printing: Clinical applications in orthopaedics and traumatology”, EFORT Open Reviews (2016) – DOI: 10.1302/2058-5241.1.000012 – Open Access under the CC BY license

 

Papers in international conference proceedings

  1. V. Mercuri, G. Balduzzi, D. Asprone, F. Auricchio. “2D non-prismatic beam model for stiffness matrix evaluation”, WCTE 2016 – World Conference on Timber Engineering (2016)
  2. G. Balduzzi, G. Hochreiner, J. Füssl, F. Auricchio. “Performance evaluation of new straightforward formulas for the serviceability analysis of cambered timber beams”, WCTE 2016 – World Conference on Timber Engineering (2016)
  3. J. Niiranen, S. Khakalo, V. Balobanov, J. Kiendl, A.H. Niemi, B. Hosseini, A. Reali. “Isogeometric Galerkin methods for gradient-elastic bars, beams, membranes and plates”, Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (2016) – DOI: 10.7712/100016.2002.9170
  4. A. Reali, T.J.R. Hughes. “IGA Collocation, aka “the Ultimate Reduced Quadrature IGA Method”: Some Results, Applications, and Open Problems”, Oberwolfach Report 8/2016, MFO Mini-Workshop: Mathematical Foundations of Isogeometric Analysis (2016)
  5. X. Zou, P. Díez, M. Conti, F. Auricchio. “Towards a non-intrusive Proper Generalized Decomposition scheme for model order reduction”, ECCOMAS Congress 2016 – Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering (2016) – DOI: 10.7712/100016.2107.10699
  6. A. Amendola, F. Fabbrocino, L. Feo, F. Auricchio, F. Fraternali. “Dependence of the mechanical properties of pentamode materials on the lattice microstructure”, ECCOMAS Congress 2016 – Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering (2016) – DOI: 10.7712/100016.1947.6004

 

Book chapters

  1. F. Auricchio, A. Lefieux, A. Reali. “On the Use of Anisotropic Triangles with Mixed Finite Elements: Application to an “Immersed” Approach for Incompressible Flow Problems”, in “Advanced finite element technologies”, Springer (2016) – DOI: 10.1007/978-3-319-31925-4_8
  2. A. Lefieux, F. Auricchio, M. Conti, S. Morganti, A. Reali, S. Trimarchi, A. Veneziani. “Computational study of aortic hemodynamics: from simplified to patient-specific geometries”, in “Advances in Computational Fluid-Structure Interaction and Flow Simulation”, Springer Basel (2016) – DOI: 10.1007/978-3-319-40827-9_31
  3. F. Auricchio, F. Brezzi, A. Lefieux, A. Reali. Numerical studies on the stability of mixed finite elements over anisotropic meshes arising from immersed boundary Stokes problems”, in “Advances in Computational Fluid-Structure Interaction and Flow Simulation”, Springer-Birkhäuser (2016) – DOI: 10.1007/978-3-319-40827-9_25

Papers in international journals

  1. E. Brivadis, A. Buffa, B. Wohlmuth, L. Wunderlich. “Isogeometric mortar methods”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.09.012
  2. J. Kiendl, F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali. “Isogeometric collocation methods for the Reissner-Mindlin plate problem”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.09.011
  3. S. Morganti, F. Auricchio, D.J. Benson, F.I. Gambarin, S. Hartmann, T.J.R. Hughes, A. Reali. “Patient-specific isogeometric structural analysis of aortic valve closure”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.10.010
  4. M. Rezaiee-Pajand, F. Auricchio, Mehrzad Sharifian, Mehrdad Sharifian. “Exponential-based integration for Bigoni–Piccolroaz plasticity model”, European Journal of Mechanics – A/Solids (2015) – DOI: 10.1016/j.euromechsol.2014.12.003
  5. F. Auricchio, A.-L. Bessoud, A. Reali, U. Stefanelli. “A phenomenological model for the magneto-mechanical response of single-crystal Magnetic Shape Memory Alloys”, European Journal of Mechanics – A/Solids (2015) – DOI: 10.1016/j.euromechsol.2014.12.011
  6. J. Kiendl, F. Auricchio, T.J.R. Huges, A. Reali. “Single-variable formulations and isogeometric discretizations for shear deformable beams”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.11.011
  7. F. Auricchio, M. Conti, A. Ferrara, E. Lanzarone. “A Clinically Applicable Stochastic Approach for Noninvasive Estimation of Aortic Stiffness Using Computed Tomography Data”, IEEE Transactions on Biomedical Engineering (2015) – DOI: 10.1109/TBME.2014.2343673
  8. F. Auricchio, A. Constantinescu, M. Conti, G. Scalet. “A computational approach for the lifetime prediction of cardiovascular balloon-expandable stents”, International Journal of Fatigue (2015) – DOI: 10.1016/j.ijfatigue.2015.02.002
  9. G. Scalet, F. Auricchio, E. Bonetti, L. Castellani, D. Ferri, M. Pachera, F. Scavello. “An experimental, theoretical and numerical investigation of shape memory polymers”, International Journal of Plasticity (2015) – DOI: 10.1016/j.ijplas.2014.10.006
  10. F. Auricchio, G. Balduzzi, C. Lovadina. “The dimensional reduction approach for 2D non-prismatic beam modelling: A solution based on Hellinger–Reissner principle”, International Journal of Solids and Structures (2015) – DOI: 10.1016/j.ijsolstr.2015.03.004
  11. J. Kiendl, M.-C. Hsu, M.C.H. Wu, A. Reali. “Isogeometric Kirchhoff-Love shell formulations for general hyperelastic materials”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2015.03.010
  12. L. Beirao da Veiga, T.J.R. Hughes, J. Kiendl, C. Lovadina, J.Niiranen, A. Reali, H. Speleers. “A locking-free model for Reissner-Mindlin plates: Analysis and isogeometric implementation via NURBS and triangular NURPS”, Mathematical Models and Methods in Applied Sciences (2015) – DOI: 10.1142/S0218202515500402
  13. M. F. Urbano, F. Auricchio. “Modeling Permanent Deformations of Superelastic and Shape Memory Materials”, Journal of Functional Biomaterials (2015) – DOI: 10.3390/jfb6020398
  14. M.-C. Hsu, D. Kamensky, F. Xu, J. Kiendl, C. Wang, M.C.H. Wu, J. Minero., A. Reali,Y. Bazilevs, M. Sacks. “Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models”, Computational Mechanics (2015) – DOI: 10.1007/s00466-015-1166-x
  15. E. Gasparini, S. C. Tarantino, M. Conti, R. Biesuz, P. Ghigna, F. Auricchio, M. P. Riccardi, M. Zema. “Geopolymers from low-T activated kaolin: Implications for the use of alunite-bearing raw materials”, Applied Clay Science (2015) – DOI: 10.1016/j.clay.2015.06.040
  16. A. Beltempo, G. Balduzzi, G. Alfano, F. Auricchio. Analytical derivation of a general 2D non-prismatic beam model based on the Hellinger-Reissner principle”, Engineering Structures (2015) – DOI: 10.1016/j.engstruct.2015.06.020
  17. V. Sepe , F. Auricchio, S. Marfia, E. Sacco. “Micromechanical analysis of porous SMA”, Smart Materials and Structures (2015) – DOI: 10.1088/0964-1726/24/8/085035
  18. M. Ferraro, F. Auricchio, E. Boatti, G. Scalet, M. Conti, S. Morganti, A. Reali. “An Efficient Finite Element Framework to Assess Flexibility Performances of SMA Self-Expandable Carotid Artery Stents”, Journal of Functional Biomaterials (2015) – DOI: 10.3390/jfb6030585
  19. I. Bianchini, R. Argiento, F. Auricchio, E. Lanzarone. “Efficient uncertainty quantification in stochastic finite element analysis based on functional principal components”, Computational Mechanics (2015) – DOI: 10.1007/s00466-015-1185-7
  20. F. Auricchio, M. Conti, M. Ferraro, S. Morganti, A. Reali, R.L. Taylor. “Innovative and efficient stent flexibility simulations based on isogeometric analysis”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2015.07.011
  21. D. Asprone, F. Auricchio, A. Montanino, A. Reali. “Review of the modified finite particle method and applications to incompressible solids”, International Journal of Multiphysics (2015) – DOI: 10.1260/1750-9548.9.3.235
  22. C. Manni, A. Reali, H. Speleers. “Isogeometric collocation methods with generalized B-splines”, Computers and Mathematics with Applications (2015) – DOI: 10.1016/j.camwa.2015.03.027
  23. F. Auricchio, F. Brezzi, A. Lefieux, A. Reali. “An “immersed” finite element method based on a locally anisotropic remeshing for the incompressible Stokes problem”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.10.001
  24. F. Auricchio, D. Boffi, L. Gastaldi, A. Lefieux, A. Reali. “On a fictitious domain method with distributed Lagrange multiplier for interface problems”, Applied Numerical Mathematics (2015) – DOI: 10.1016/j.apnum.2014.05.013
  25. S. Kollmannsberger, A.  Ozcan, J. Baiges, M. Ruess, E. Rank, A. Reali. “Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches”, International Journal for Numerical Methods in Engineering (2015) – DOI: 10.1002/nme.4817
  26. A. Reali, H. Gomez. “An isogeometric collocation approach for Bernoulli-Euler beams and Kirchhoff plates”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.10.027
  27. L. De Lorenzis, J.A. Evans, T.J.R. Hughes, A. Reali. “Isogeometric Collocation: Neumann boundary conditions and contact”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.06.037
  28. B. Carboni, W. Lacarbonara, F. Auricchio. Hysteresis of Multiconfiguration Assemblies of Nitinol and Steel Strands: Experiments and Phenomenological Identification”, Journal of Engineering Mechanics (2015) – DOI: 10.1061/(ASCE)EM.1943-7889.0000852
  29. M.A. Yousef, P. Dionigi, S. Marconi, A. Calligaro, A.I. Cornaglia, E. Alfonsi, F. Auricchio. “Successful reconstruction of nerve defects using distraction neurogenesis with a new experimental device”, Basic and Clinical Neuroscience (2015) – PMID: 26649163
  30. F.J.H. Nauta, M. Conti, A.V. Kamman, G.H.W. van Bogerijen, J.L. Tolenaar, F. Auricchio, C.A. Figueroa, J.A. van Herwaarden, F.L. Moll, S. Trimarchi. “Biomechanical Changes After Thoracic Endovascular Aortic Repair in Type B Dissection: A Systematic Review”, Journal of Endovascular Therapy (2015) – DOI: 10.1177/1526602815608848
  31. J.F. Caseiro, R.A.F. Valente, A. Reali, J. Kiendl, F. Auricchio, R.J. Alves de Sousa. “Assumed Natural Strain NURBS-based solid-shell element for the analysis of large deformation elasto-plastic thin-shell structures”, Computer Methods in Applied Mechanics and Engineering (2015) – DOI: 10.1016/j.cma.2014.10.037
  32. M. Belloli, S. Giappino, S. Morganti, S. Muggiasca, A. Zasso. “Vortex induced vibrations at high Reynolds numbers on circular cylinders”, Ocean Engineering (2015) – DOI: 10.1016/j.oceaneng.2014.11.017

 

Papers in international conference proceedings

  1. F. Auricchio, M. Ferretti, A. Lefieux, M. Musci, A. Reali, S. Trimarchi, A. Veneziani. “Assessment of a Black-box Approach for a Parallel Finite Elements Solver in Computational Hemodynamics”, Proceedings – 14th IEEE International Conference on Trust, Security and Privacy in Computing and Communications (TrustCom 2015), 2015 IEEE Trustcom/BigDataSE/ISPA (2015) – DOI: 10.1109/Trustcom-BigDataSe-
  2. C. Trentin, E. Faggiano, M. Conti, F. Auricchio. “An automatic tool for thoracic aorta segmentation and 3D geometric analysis”, 9th International Symposium on Image and Signal Processing and Analysis (ISPA 2015) (2015) – DOI: 10.1109/ISPA.2015.7306033
  3. D. Asprone, F. Auricchio, A. Montanino, A. Reali. “Solution of the stationary stokes and Navier-Stokes equations using the modified finite particle method in the framework of a least squares residual method”, Proceedings of the 4th International Conference on Particle-Based Methods – Fundamentals and Applications (PARTICLES 2015) (2015)
  4. E. Lanzarone, F. Auricchio, M. Conti, A. Ferrara. “Bayesian Estimation of the Aortic Stiffness based on Non-invasive Computed Tomography Images”, Bayesian Statistics from Methods to Models and Applications, Springer Proceedings in Mathematics and Statistics (2015) – DOI: 10.1007/978-3-319-16238-6_12
  5. F.J. Nauta, M. Conti, S. Marconi, A.V. Kamman, G. Alaimo, S. Morganti, A. Ferrara, J. van Herwaarden, F.L. Moll, F. Auricchio, S. Trimarchi. “TCT-781 Thoracic Endovascular Repair Decreases Longitudinal Aortic Distensibility: Experimental Study in an Ex-Vivo Porcine Model”, Journal of the American College of Cardiology (2015) – DOI: 10.1016/j.jacc.2015.08.1091

 

Book chapters

  1. F. Auricchio, S. Marconi, G. Alaimo. “Materiali per la stampa 3D, possibilità attuali e prospettive future in “Stampa 3D””, in “STAMPA 3D Azienda, economia, finanza, IT, brevetti, lavoro, sicurezza, ambiente. Profili giuridici e opportunità di business”, Filodritto (2015)
  2. A. Reali, T.J.R. Hughes. An Introduction to Isogeometric Collocation Methods”, in “Isogeometric Methods for Numerical Simulation”, Springer (2015) – DOI: 10.1007/978-3-7091-1843-6_4
  3. C. Menna, F. Auricchio, D. Asprone. “Applications of Shape Memory Alloys in Structural Engineering, in “Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications”, Butterworth-Heinemann (2015) – DOI: 10.1016/B978-0-08-099920-3.00013-9
  4. F. Auricchio, E. Boatti, M. Conti. “SMA Biomedical Applications, in “Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications”, Butterworth-Heinemann (2015) – DOI: 10.1016/B978-0-08-099920-3.00011-5
  5. F. Auricchio, E. Boatti, M. Conti. “SMA Cardiovascular Applications and Computer-Based Design, in “Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications”, Butterworth-Heinemann (2015) – DOI: 10.1016/B978-0-08-099920-3.00012-7

 

Patents

  1. P. Canzi, M. Benazzo, S. Marconi, F. Auricchio, Temporal Bone Holder, Italian Patent Office n. 102015000041482, August 3, 2015

Papers in international journals

  1. D. Asprone, F. Auricchio, A. Reali. “Modified Finite Particle Method: applications to elasticity and plasticity problems”, International Journal of Computational Methods (2014) – DOI: 10.1142/S0219876213500503
  2. F. Auricchio, M. Conti, C. Ferrazzano, G. A. Sgueglia. “A simple framework to generate 3D patient-specific model of coronary artery bifurcation froms single-plane angiographic images”, Computers in Biology and Medicine (2014) – DOI: 10.1016/j.compbiomed.2013.10.027
  3. F. Auricchio, G. Scalet, M. Urbano. “A Numerical/Experimental Study of Nitinol Actuator Springs”, Journal of Materials Engineering and Performance (2014) – DOI: 10.1007/s11665-014-0883-1
  4. H. Gomez, A. Reali, G. Sangalli. “Accurate, efficient, and (iso)geometrically flexible collocation methods for phase-field models”, Journal for Computational Physics (2014) – DOI: 10.1016/j.jcp.2013.12.044
  5. T.J.R. Hughes, J.A. Evans, A. Reali. “Finite Element and NURBS Approximations of Eigenvalue, Boundary-value, and Initial-value Problems”, Computer Methods in Applied Mechanics and Engineering (2014) – DOI: 10.1016/j.cma.2013.11.012
  6. J.F. Caseiro, R.A.F. Valente, A. Reali, J. Kiendl, F. Auricchio, R.J. Alves de Sousa. “On the Assumed Natural Strain method to alleviate locking in solid-shell NURBS-based finite elements”, Computational Mechanics (2014) – DOI: 10.1007/s00466-014-0978-4
  7. F. Auricchio, M. Conti, A. Lefieux, S. Morganti, A. Reali, F. Sardanelli, F. Secchi, S. Trimarchi, A. Veneziani. “Patient-specific analysis of post-operative aortic hemodynamics: a focus on thoracic endovascular repair (TEVAR)”, Computational Mechanics (2014) – DOI: 10.1007/s00466-014-0976-6
  8. F. Auricchio, E. Bonetti, G. Scalet, F. Ubertini. “Theoretical and numerical modeling of shape memory alloys accounting for multiple phase transformations and martensite reorientation”, International Journal of Plasticity (2014) – DOI: 10.1016/j.ijplas.2014.03.008PrePrint
  9. F. Auricchio, M. Conti, A. Ferrara. “How Constitutive Model Complexity can Affect the Capability to Fit Experimental Data: a Focus on Human Carotid Arteries and Extension/Inflation Data”, Archives of Computational Methods in Engineering (2014) – DOI: 10.1007/s11831-014-9105-0
  10. F. Auricchio, A. Constantinescu, G. Scalet. Fatigue of 316L stainless steel notched µm-size components, International Journal of Fatigue, vol. 68, pp. 231-247, DOI: 10.1016/j.ijfatigue.2014.04.013 (2014) –
  11. F. Auricchio, M. Conti, A. Ferrara, S. Morganti, A. Reali. Patient-specific simulation of a stentless aortic valve implant: the impact of fibers on leaflet performance. Computer Methods in Biomechanics and Biomedical Engineering, vol. 17, pp. 277-285 (2014) –
  12. M. Rezaiee-Pajand, F. Auricchio, M. Sharifian, M. Sharifian. Computational plasticity of mixed hardening pressure-dependency constitutive equations. Acta Mechanica, vol. 255(6), pp. 1699-1733 (2014) –
  13. D. Asprone, F. Auricchio, A. Montanino, A. Reali. A Modified Finite Particle Method: multidimensional elasto-statics and dynamics. International Journal for Numerical Methods in Engineering, vol. 99, pp. 1-25 (2014) –
  14. F. Auricchio, G. Balduzzi, M.J. Khoshgoftar, G.R. Rahimi, E. Sacco. Enhanced modeling approach for multilayer anisotropic plates based on dimension reduction method and Hellinger–Reissner principle. Composite Structures, vol. 118, pp. 622-633 (2014).
  15. S. Morganti, M. Conti, M. Aiello, A. Valentini, A. Mazzola, A. Reali, F. Auricchio. Simulation of transcatheter aortic valve implantation through patient-specific finite element analysis: Two clinical cases. Journal of Biomechanics, 47(11), pp. 2547-2555.
  16. F. Auricchio, D. Boffi, L. Gastaldi, A. Lefieux, A. Reali. A study on unfitted 1D finite element methods. Published online on Computers and Mathematics with Applications (2014), doi:10.1016/j.camwa.2014.08.018.
  17. S. Kollmannsberger, A. Ozcan, J. Baiges, M. Ruess, E. Rank, A. Reali. Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches. International Journal for Numerical Methods in Engineering ,2014.
  18. G.H.V. van Bogerijen, F. Auricchio, M. Conti, A. Lefieux, A. Reali, A. Veneziani, J.L. Tolenaar, F.L. Moll, V. Rampoldi, S. Trimarchi. Aortic hemodynamics after thoracic endovascular aortic repair with particular attention to the bird-beak configuration. Journal of Endovascular Therapy, vol. 21 (6), pp. 791-802 (2014)

Papers in international conference proceedings

  1. F. Auricchio, G. Scalet, M. Urbano. “A numerical/experimental study of nitinol actuator springs”, Journal of Materials Engineering and Performance (2014) – DOI: 10.1007/s11665-014-0883-1

Book chapters

  1. Auricchio, M. Conti, S. Morganti. “Aortic Biological Prosthetic Valve for Open-Surgery and Percutaneous Implant: Procedure Simulation and Performance Assessment”, in “Cardiovascular and Cardiac Therapeutic Device”, Springer (2014) – DOI: 10.1007/8415_2013_161

Papers in international journals

  1. F. Auricchio, E. Bonetti. A new flexible 3D macroscopic model for shape memory alloys. Discrete and Continuous Dynamical Systems, 6 (2013), 277-291.
  2. F. Auricchio, M. Conti, A. Ferrara, S. Morganti, A. Reali. Patient-specific finite element analysis of carotid artery stenting: a focus on vessel modeling. International Journal for Numerical Methods in Biomedical Engineering, 29 (2013), 645-664.
  3. D. Schillinger, J.A. Evans, A. Reali, M.A. Scott, T.J.R. Hughes. Isogeometric Collocation: Cost Comparison with Galerkin Methods and Extension to Adaptive Hierarchical NURBS Discretizations. Computer Methods in Applied Mechanics and Engineering, 267 (2013), 170-232.
  4. D. Asprone, F. Auricchio, A. Reali. Modified Finite Particle Method: applications to elasticity and plasticity problems. Published online on International Journal of Computational Methods, doi: 10.1142/S0219876213500503.
  5. F. Auricchio, M. Conti, S. Marconi, A. Reali, J. Tolenaar, S. Trimarchi. Patient-specific aortic endografting simulation: from diagnosis to prediction. Computers in Biology and Medicine, 43 (2013), 386-394.
  6. G. De Santis, M. Conti, B. Trachet, T. De Schryver, M. De Beule, J. Degroote, J. Vierendeels, F. Auricchio, P. Segers, P. Verdonck, B. Verhegghe. Hemodynamic impact of stent-vessel (mal)apposition following carotid artery stenting: mind the gaps!. Computer Methods in Biomechanics and Biomedical Engineering, 16 (2013), 648-659.
  7. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali, R.L. Taylor, P. Wriggers. Approximation of incompressible large deformation elastic problems: some unresolved issues. Computational Mechanics, 52 (2013), 1153-1167.
  8. D. Asprone, F. Auricchio, C. Menna, A. Prota, S. Morganti, A. Reali. Statistical Finite Element Analysis of the Buckling Behavior of Honeycomb Structures. Composite Structures, 105 (2013), 240–255.
  9. F. Auricchio, L. Beirao da Veiga, J. Kiendl, C. Lovadina, A. Reali. Locking-free isogeometric collocation methods for spatial Timoshenko rods. Computer Methods in Applied Mechanics and Engineering, 263 (2013), 113-126.
  10. F. Auricchio, G. Balduzzi, C. Lovadina. The dimensional reduction modelling approach for 3D beams: Differential equations and finite-element solutions based on Hellinger–Reissner principle. International Journal of Solids and Structures, 50 (2013), 4184–4196.
  11. G. van Bogerijen, J. L. Tolenaar, M. Conti, F. Auricchio, F. Secchi, F. Sardanelli, F. L. Moll, J. A. van Herwaarden, V. Rampoldi, S. Trimarchi. Contemporary Role of Computational Analysis in Endovascular Treatment for Thoracic Aortic Disease. Aorta, 1 (2013), 171–181
  12. S. Morganti, A.Valentini, V. Favalli, A. Serio, F. I. Gambarin, D. Vella, L. Mazzocchi, M. Massetti, F. Auricchio, E. Arbustini. Aortic root 3D parametric morphological model from 2D-echo images. Computers in Biology and Medicine, 43 (2013), 2196–2204.
  13. G. De Santis, B. Trachet, M. Conti, M. De Beule, U. Morbiducci, P. Mortier, P. Segers, P. Verdonck, B. Verhegghe. A computational study of the hemodynamic impact of open vs. closed stent cell design in carotid artery stenting. Published online on Artificial Organs.
  14. H.A.F.A. Santos, F. Auricchio, M. Conti. Numerical fatigue life assessment of cardiovascular stents: A two-scale plasticity-damage model.Conference Series, 451(1), 012031.
  15. F. Auricchio, M. Conti, S. Morganti, A. Reali. Simulation of transcatheter aortic valve implantation: a patient-specific finite element approach. Computer Methods in Biomechanics and Biomedical Engineering, vol. 17, pp. 1347-1357 (2014).

Papers in international journals

  1. P. Totaro, S. Morganti, C. L. Ngo Yon, R. Dore, M. Conti, F. Auricchio, M. Viganò. Computational Finite Element Analyses to Optimize Graft Sizing During Aortic Valve-Sparing Procedure. Journal of Heart Valve Disease, 21 (2012), 141-147.
  2. H.A.F. Argente dos Santos, F. Auricchio, M. Conti. Fatigue life assessment of cardiovascular balloon-expandable stents: A two-scale plasticity–damage model approach. Journal of the Mechanical Behavior of Biomedical Materials, vol 15 (2012), pp. 78-92
  3. F. Auricchio, A. Ferrara, S. Morganti. Comparison and critical analysis of invariant-based models with respect to their ability in fitting human aortic valve data. Annals of Solid and Structural Mechanics, vol. 4 (2012), pp. 1-14.
  4. F. Auricchio, M. Conti, M. Ferraro, A. Reali. Evaluation of carotid stent scaffolding through patient-specific finite element analysis. International Journal for Numerical Methods in Biomedical Engineering, 28 (2012), 1043–1055.
  5. F. Auricchio, L. Beirao da Veiga, T.J.R. Hughes, A. Reali, G. Sangalli. Isogeometric collocation for elastostatics and explicit dynamics. Computer Methods in Applied Mechanics and Engineering, 249-252 (2012), 2-14.
  6. F. Auricchio, F Calabrò, T.J.R. Hughes, A. Reali, G. Sangalli. A Simple Algorithm for Obtaining Nearly Optimal Quadrature Rules for NURBS-based Isogeometric Analysis. Computer Methods in Applied Mechanics and Engineering, 249-252 (2012), pp. 15–27.
  7. L. Beirao da Veiga, C. Lovadina, A. Reali. Avoiding shear locking for the Timoshenko beam problem via isogeometric collocation methods. Computer Methods in Applied Mechanics and Engineering, vol. 241-244 (2012), pp. 38–51.

 

Papers in international conference proceedings

  1. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali, R.L. Taylor, P. Wriggers, Approximations of incompressible large deformation elastic problems: some unresolved issues!, Proceedings of the Advanced Computational Engineering, Mathematisches Forschungsinstitut Oberwolfach. Report No. 09/2012. DOI: 10.4171/OWR/2012/09 (2012).
  2. S. Marconi, F. Auricchio, A. Pietrabissa, 3D Virtual and physical pancreas reconstruction discriminating between health and tumor tissue with fuzzy logic, International Journal of Computer Assisted Radiology and Surgery, 7 (Suppl.1): S71–S88, DOI 10.1007/s11548-012-0710-9 (2012).
  3. F. Auricchio, M. Conti, M. Ferraro, A. Reali, Evaluation of carotid stent scaffolding through patient-specific finite element analysis, ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, pp. 5870-5883 (2012).
  4. F. Auricchio, G. Balduzzi, C. Lovadina, Mixed 3D beam models: Differential equation derivation and finite element solutions, ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, pp. 3860-3870 (2012).
  5. F. Auricchio, E. Bonetti, G. Scalet, F. Ubertini, Refined shape memory alloys model taking into account martensite reorientation, ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, pp. 3349-3362 (2012).
  6. M. Palmieri, G. Magenes, C.G. Lai, A. Penna, F. Bozzoni, M. Rota, G. Macchi, F. Auricchio, M.D. Mangriotis, A. Menon, A. Meher Prasad, C.V.R. Murty, Reduction of seismic risk of roman and hindu temples, SAHC 2012 – 8th International Conference on Structural Analysis of Historical Construction.

Papers in international journals

  1. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. An improved, fully symmetric, finite-strain phenomenological constitutive model for shape memory alloys. Finite Elements in Analysis and Design, 47 (2011), 166-174.
  2. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the robustness and efficiency of integration algorithms for a 3D finite strain phenomenological SMA constitutive model. International Journal for Numerical Methods in Engineering, 85 (2011), 107-134.
  3. O. Ben Mekki, F. Auricchio. Performance evaluation of shape-memory-alloy superelastic behavior to control a stay cable in cable-stayed bridges. International Journal of Non-Linear Mechanics, 46 (2011), 470-477.
  4. F. Auricchio, S. Morganti, A. Reali, M. Urbano. Theoretical and experimental study of the shape memory effect of beams in bending conditions. Journal of Materials Engineering and Performance, 20 (2011), 712-718.
  5. F. Auricchio, A.-L. Bessoud, A. Reali, U. Stefanelli. A three-dimensional phenomenological model for Magnetic Shape Memory Alloys. GAMM- Mitteilungen, 34 (2011), 90-96.
  6. G. Attanasi, F. Auricchio. Innovative Superelastic Isolation Device. Journal of Earthquake Engineering, 15 (2011), 72-89.
  7. D. Asprone, F. Auricchio, A. Reali. Novel Finite Particle Formulations Based on Projection Methodologies. International Journal for Numerical Methods in Fluids, 65 (2011), 1376-1388.
  8. J. Arghavani, F. Auricchio, R. Naghdabadi. A finite strain kinematic hardening constitutive model based on Hencky strain: general framework, solution algorithm and application to shape memory alloys. International Journal of Plasticity, 27 (2011), 940–961.
  9. F. Auricchio, M. Conti, M. De Beule, G. De Santis, B. Verhegghe. Carotid artery stenting simulation: From patient-specific images to finite element analysis. Medical Engineering & Physics, 33 (2011) 281-289.
  10. G. Attanasi, F. Auricchio, M. Urbano. Theoretical and Experimental Investigation on SMA Superelastic Springs. Journal of Materials Engineering and Performance, 20 (2011), 706-711.
  11. M. Conti, D. Van Loo, F. Auricchio, M. De Beule, G. De Santis, B. Verhegghe, S. Pirrelli, A. Odero. Impact of Carotid Stent Cell Design on Vessel Scaffolding: A Case Study Comparing Experimental Investigation and Numerical Simulations. Journal of Endovascular Therapy, 18 (2011), 397-406.
  12. C. de Falco, A. Reali, R. Vazquez. GeoPDEs: a research tool for IsoGeometric Analysis of PDEs . Advances in Engineering Software, 42 (2011), 1020–1034.
  13. F. Auricchio, M. Conti, S. Morganti, P. Totaro. A computational tool to support pre- operative planning of stentless aortic valve prosthesis. Medical Engineering & Physics, 33 (2011), 1183-1192.

 

Papers in international conference proceedings

  1. F. Auricchio, M. Conti, A. Ferrara, S. Morganti, A. Reali. Patient-specific Finite Element Analysis of Carotid Artery Stenting: Impact of constitutive vessel modeling on vessel wall stress distribution. Proceedings of the 2nd International Conference on Computational & Mathematical Biomedical Engineering, CMBE2011 (2011).
  2. F. Auricchio, M. Conti, S. Morganti, P. Totaro, M. Viganò. Finite Element Analysis of Stentless Valve Implant in Patient-Specific Aortic Root Geometry, Proceedings of the 2nd International Conference on Computational & Mathematical Biomedical Engineering, CMBE2011 (2011).

Papers in international journals

  1. T.J.R. Hughes, A. Reali, G. Sangalli. Efficient Quadrature for NURBS-based Isogeometric Analysis. Computer Methods in Applied Mechanics and Engineering, 199 (2010), 301-313.
  2. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali. The importance of the exact satisfaction of the incompressibility constraint in nonlinear elasticity: mixed FEMs versus NURBS-based approximations. Computer Methods in Applied Mechanics and Engineering, 199 (2010), 314-323.
  3. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour. A 3-D phenomenological constitutive model for shape memory alloys under multiaxial loadings. International Journal of Plasticity, 26 (2010), 976-991.
  4. F. Auricchio, A. Reali, A. Tardugno. Shape-memory alloys: effective 3D modeling, computational aspects and design of devices. International Journal of Computational Materials Science and Surface Engineering, 3 (2010), 199-223.
  5. F. Auricchio, L. Beirao da Veiga, T.J.R. Hughes, A. Reali, G. Sangalli. Isogeometric Collocation Methods. Mathematical Models and Methods in Applied Sciences, 20 (2010), 2075-2107.
  6. F. Auricchio, M. Conti, S. Morganti, A. Reali. Shape Memory Alloy: from constitutive modelling to finite element analysis of stent deployment. Computer Modeling in Engineering & Sciences (CMES), 57 (2010), 225-243.
  7. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour. A 3D finite strain phenomenological constitutive model for shape memory alloys considering martensite reorientation. Continuum Mechanics and Thermodynamics, 22 (2010), 345-362.
  8. F. Auricchio, E. Bonetti, A. Marigonda. A metric approach to plasticity via Hamilton-Jacobi equation. Mathematical Models and Methods in Applied Sciences, 20 (2010), 1617-1647.
  9. F. Auricchio, G. Balduzzi, C. Lovadina. A new modeling approach for planar beams: finite-element solutions based on mixed variational derivations. Journal of Mechanics of Materials and Structures, 5 (2010), 771-794.
  10. D. Asprone, F. Auricchio, G. Manfredi, A. Prota, A. Reali, G. Sangalli. SPH methods for a 1D elastic model problem: error analysis and development of a second-order accurate formulation. Computer Modeling in Engineering & Sciences (CMES), 62 (2010), 1-22.

 

Papers in international conference proceedings

  1. J. Arghavani, F. Auricchio, A. Reali, S. Sohrabpour. A class of shape memory alloy constitutive models based on a new set of internal variables, Proceedings of the ISME2010, 18th Annual International Conference on Mechanical Engineering (2010).
  2. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. A finite strain SMA constitutive model: comparison of small and finite strain formulations, Proceedings of the ISME2010, 18th Annual International Conference on Mechanical Engineering (2010).
  3. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour. An efficient, non-regularized solution algorithm for a finite strain shape memory alloy constitutivw model, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010 (2010).
  4. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings – Part I: constitutive model development at small and finite strains, Proceedings of the School and Symposium on Smart Structural Systems Technologies (2010).
  5. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings – Part II: numerical implementation and simulations, Proceedings of the School and Symposium on Smart Structural Systems Technologies (2010).
  6. F. Auricchio, J. Arghavani, M. Conti, S. Morganti, A. Reali, U. Stefanelli. Shape-memory alloys: effective 3D modeling, computational aspects and analysis of actuator and biomedical devices, Proceedings of ACTUATOR10 – International Conference and Exhibition on New Actuators and Drive Systems (2010).
  7. F. Auricchio, M. Conti, S. Morganti, P. Totaro, M. Viganò. Finite Element Analysis of Stentless Valve Implant in Patient-Specific Aortic Root Geometry, RUM2010 – SIMULIA Italy Regional Users’ Meeting (2010).
  8. M. Conti, F. Auricchio, G. De Santis, M. De Beule, B. Verhegghe. Patient-specific finite element analysis of carotid artery stenting, Proceedings of the ASME 2010 Summer Bioengineering Conference SBC2010 (2010).
  9. S. Soltane, O. Ben Mekki, S. Montassar, F. Auricchio. Damping stay-cable transverse vibration using shape memory alloys and magneto rheological dampers, Proceedings of the Third Euro Mediterranean Symposium on Advances in Geomaterials ans Structures AGS2010 (2010).

Papers in international journals

  1. M. Conti, M. De Beule, P. Mortier, D. Van Loo, P. Verdonck, F. Vermassen, P. Segers, B. Verhegghe, F. Auricchio. Nitinol Embolic Protection Filters: Design Investigation by Finite Element Analysis. Journal of Materials Engineering and Performance, 18 (2009), 787-792.
  2. F. Auricchio, A. Reali, U. Stefanelli. A macroscopic 1D model for shape memory alloys including asymmetric behaviors and transformation-dependent elastic properties. Computer Methods in Applied Mechanics and Engineering, 198 (2009), 1631-1637.
  3. G. Attanasi, F. Auricchio, G.L. Fenves. Feasibility assessment of an innovative isolation bearing system with shape memory alloys. Journal of Earthquake Engineering, 13 (2009) 18-39.
  4. F. Auricchio, A. Coda, A. Reali, M. Urbano. SMA numerical modeling versus experimental results: parameter identification and model prediction capabilities. Journal of Materials Engineering and Performance, 18 (2009), 649-654.
  5. G. Attanasi, F. Auricchio, G.L. Fenves. Feasibility investigation of superelastic effect devices for seismic isolation applications. Journal of Materials Engineering and Performance, 18 (2009), 729-737.

 

Book chapters

  1. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali. Stability of Some Finite Element Methods for Finite Elasticity Problems, in “Mixed Finite Element Technologies”, editors: C. Carstensen, P. Wriggers. Springer (2009), 179–206.

 

Papers in international conference proceedings

  1. T.J.R. Hughes, A. Reali, G. Sangalli. Isogeometric Methods in Structural Dynamics and Wave Propagation, Proceedings of COMPDYN 2009 – Computational Methods in Structural Dynamics and Earthquake Engineering (2009).
  2. F. Auricchio, M. Conti, S. Morganti, A. Reali. A discussion on SMA beams under flexure exploiting the shape-memory effect, Proceedings of the COMPLAS X – X International Conference on Computational Plasticity, Barcelona, Spain (2009).
  3. A. Reali. Advanced Computational Tools for Structural Mechanics and Earthquake Engineering, Proceedings of Earthquake Engineering by the Beach (2009).
  4. F. Auricchio, S. Morganti, A. Reali. SMA numerical modeling versus experimental results, Proceedings of the ESOMAT2009, 8th European Symposium on Martensitic Transformation (2009).
  5. S. Soltane, O. Ben Mekki, S. Montassar, F. Auricchio. Contrôle des vibrations transversales des câbles des ponts à haubans par des alliages à mémoire de forme, Matériaux Sols et Structures (MS2), Tunisia (2009).
  6. F. Auricchio, M. Conti, S. Morganti, A. Reali. Shape Memory Alloys: Material Modeling and Device Finite Element Simulations, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems, Freiberg, Germany (2009).
  7. M. De Beule, M. Conti, P. Mortier, D. Van Loo, P. Verdonck, F. Vermassen, P. Segers, F. Auricchio, B. Verhegghe. Finite element desgn of nitilon embolic protection filters based on parametric modeling with PyFormex: a feasibility study, Proceedings of the ASME 2009 Summer Bioengineering Conference, SBC2009 (2009).
  8. M. Conti, F. Auricchio, M. De Beule, E. Calabrese, B. Verhegghe. Nitilon peripheral stents: a computational framework to investigate the stent design from lasercutting to deployment, Proceedings of the ASME 2009 Summer Bioengineering Conference, SBC2009 (2009).
  9. M. Conti, F. Auricchio, M. De Beule, B. Verhegghe. Numerical simulation of Nitinol peripheral stents: from laser-cutting to deployment in a patient specific anatomy, Proceedings of the ESOMAT2009, 8th European Symposium on Martensitic Transformation (2009).

Papers in international journals

  1. F.Auricchio, D. Fugazza, R. DesRoches. Rate-dependent thermo-mechanical modelling of superelastic shape-memory alloys for seismic applications. Journal of Intelligent Material Systems and Structures, 19 (2008), 47-61.
  2. F. Auricchio, A. Mielke, U. Stefanelli. A rate-independent model for the isothermal quasi-static evolution of shape-memory materials. Mathematical Models and Methods in Applied Sciences, 18 (2008), 125-164.
  3. F. Auricchio, A. Reali. Shape Memory Alloys: Material Modeling and Device Finite Element Simulations. Materials Science Forum, 583 (2008), 257-275.
  4. T.J.R. Hughes, A. Reali, G. Sangalli. Duality and Unified Analysis of Discrete Approximations in Structural Dynamics and Wave Propagation: Comparison of p-method Finite Elements with k-method NURBS. Computer Methods in Applied Mechanics and Engineering, 197 (2008), 4104-4124.
  5. F. Auricchio, P. Carotenuto, A. Reali. On the geometrically exact beam model: a consistent, effective and simple derivation from three-dimensional finite elasticity. International Journal of Solids and Structures, 45 (2008), 4766-4781.

 

Papers in international conference proceedings

  1. G. Attanasi, F. Auricchio, C. Crosti, G.L. Fenves. An innovative isolation bearing with shape memory alloys, 14th World Conference on Earthquake Engineering, Beijing, China (2008).

 

Papers in national conference proceedings

  1. D. Asprone, A. Prota, G. Manfredi, F. Auricchio, A. Reali, G. Sangalli. Error evaluation in approximation of derivatives using Smoothed Particle Hydrodynamics method, Memorie del XVII Convegno Italiano di Meccanica Computazionale (2008).

Papers in international journals

    1. F. Auricchio, A. Reali. A Phenomenological One-dimensional Model Describing Stress-induced Solid Phase Transformation with Permanent Inelasticity. Mechanics of Advanced Materials and Structures, 14 (2007), 43–55.
    2. F. Auricchio, A. Reali, U. Stefanelli. A Three-dimensional Model Describing Stress-induced Solid Phase Transformation with Permanent Inelasticity. International Journal of Plasticity, 23 (2007), 207–226.
    3. J.A. Cottrell, T.J.R. Hughes, A. Reali. Studies of Refinement and Continuity in Isogeometric Structural Analysis. Computer Methods in Applied Mechanics and Engineering, 196 (2007), 4160–4183.
    4. E. Artioli, F. Auricchio, L. Beirao da Veiga. Second-order accurate integration algorithms for von-Mises plasticity with a nonlinear kinematic hardening mechanism. Computer Methods in Applied Mechanics and Engineering, 196 (2007), 1827-1846.
    5. F. Auricchio, D. Fugazza, R. DesRoches. A 1D rate-dependent viscous constitutive model for superelastic shape-memory alloys: formulation and comparison with experimental data. Smart Materials and Structures, 16 (2007), S39-S50.
    6. J. McCormick, R. DesRoches, D. Fugazza, F. Auricchio. Seismic assessment of concentrically-braced steel frames with shape memory alloy braces. Journal of Structural Engineering-ASCE, 133 (2007), 862-870.
    7. E. Artioli, F. Auricchio, L. Beirão da Veiga. Generalized midpoint integration algorithms for J2 plasticity with linear hardening. International Journal for Numerical Methods in Engineering, 72 (2007), 422-463.
    8. F. Auricchio, L. Beirao da Veiga, A. Buffa, C. Lovadina, A. Reali, G. Sangalli. A Fully Locking-free Isogeometric Approach for Plane Linear Elasticity Problems: a Stream Function Formulation. Computer Methods in Applied Mechanics and Engineering, 197 (2007), 160-172.
    9. Y. Bazilevs, V.M. Calo, J.A. Cottrell, T.J.R. Hughes, A. Reali, G. Scovazzi. Variational Multiscale Residual-based Turbulence Modeling for Large Eddy Simulation of Incompressible Flows. Computer Methods in Applied Mechanics and Engineering 197 (2007), 173-201.

 

Book chapters

  1. F. Auricchio, A. Reali, U. Stefanelli. A Phenomenological 3D Model Describing Stress-induced Solid Phase Transformations with Permanent Inelasticity, in “Topics on Mathematics for Smart Systems”, editors: B. Miara, G. Stavroulakis, V. Valente. World Scientific (2007), 1–14.

 

Papers in international conference proceedings

  1. F. Auricchio, A. Reali, U. Stefanelli. Modeling and numerical solutions for shape-memory materials, Oberwolfach Report 11/2007, MFO Workshop, Analysis and Numerics for Rate-Independent Processes (2007).
  2. Y. Bazilevs, V.M. Calo, J.A. Cottrell, T.J.R. Hughes, A. Reali, G. Scovazzi. Variational Multiscale Residual-driven Turbulence Modeling for Large Eddy Simulation of Incompressible Flow, Proceedings of the ECCOMAS Thematic Conference on Multi-scale Computational Methods for Solids and Fluids (2007).
  3. E. Artioli, F. Auricchio, L. Beirão da Veiga. Double-Step Midpoint Methods for J2 Plasticity with Nonlinear Hardening, Proceedings of the IX International Conference on Computational Plasticity, editors: E. Oñate and D. R. J. Owen (2007).
  4. E. Artioli, F.Auricchio, L. Beirão da Veiga. Double-Step survey on recent developments in second-order integration methods for J2 plasticity model, Proceedings EUROSIM07 (2007).
  5. J.A. Cottrell, T.J.R. Hughes, A. Reali, G. Sangalli. Isogeometric Discretizations in Structural Dynamics and Wave Propagation, ICES Report n. 07-12, Proceedings of COMPDYN 2007 – Computational Methods in Structural Dynamics and Earthquake Engineering (2007).

Papers in international journals

  1. F. Nanni, F. Auricchio, F. Sarchi, G. Forte, G. Gusmano. Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams. Smart Materials & Structures, 15 (SI 2006), 182-186.
  2. F. Auricchio, E. Sacco, G. Vairo. A mixed FSDT finite element for monoclinic laminated plates. Computers & Structures, 84 (2006), 624-639.
  3. A. Reali. An Isogeometric Analysis approach for the study of structural vibrations. Journal of Earthquake Engineering, 10 (SI1 2006), 1-30.
  4. J.A. Cottrell, A. Reali, Y. Bazilevs, T.J.R. Hughes. Isogeometric analysis of structural vibrations. Computer Methods in Applied Mechanics and Engineering, 195 (2006), 5257-5296.
  5. F. Auricchio, D. Fugazza, R. Desroches. Earthquake performance of steel frames with nitinol braces. Journal of Earthquake Engineering, 10 (SI1 2006), 45-66.
  6. J. McCormick, R. DesRoches, D. Fugazza, F. Auricchio. Seismic vibration control using superelastic shape memory alloys. Journal of Engineering Materials and Technology-Transactions of the ASME, 128 (2006), 294-301.
  7. F. Auricchio, D. Fugazza, R. DesRoches. Numerical and experimental evaluation of the damping properties of shape-memory alloys. Journal of Engineering Materials and Technology-Transactions of the ASME, 128 (2006), 312-319.
  8. E. Artioli, F. Auricchio, L. Beirao da Veiga. A novel ‘optimal’ exponential-based integration algorithm for von-Mises plasticity with linear hardening: Theoretical analysis on yield consistency, accuracy, convergence and numerical investigations. International Journal for Numerical Methods in Engineering, 67 (2006), 449-498.

Papers in international journals

  1. F. Migliavacca, L. Petrini, V. Montanari, I. Quagliana, F. Auricchio, G. Dubini. A predictive study of the mechanical behaviour of coronary stents by computer modelling. Medical Engineering & Physics, 27 (2005), 13-18.
  2. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali. A stability study of some mixed finite elements for large deformation elasticity problems. Computer Methods in Applied Mechanics and Engineering, 194 (2005), 1075-1092.
  3. F. Auricchio, L. Beirao da Veiga, C. Lovadina, A. Reali. An analysis of some mixed-enhanced finite element for plane linear elasticity. Computer Methods in Applied Mechanics and Engineering, 194 (2005), 2947-2968.
  4. L. Petrini, F. Migliavacca, P. Massarotti, S. Schievano, G. Dubini, F. Auricchio. Computational studies of shape memory alloy behavior in biomedical applications. Journal of Biomechanical Engineering-Transactions of the ASME, 127 (2005), 716-725.
  5. F. Auricchio, U. Stefanelli. Well-posedness and approximation for a one-dimensional model for shape memory alloys. Mathematical Models & Methods in Applied Sciences 15 (2005), 1301-1327.
  6. E. Artioli, F. Auricchio, L. Beirao da Veiga.Integration schemes for von-Mises plasticity models based on exponential maps: numerical investigations and theoretical considerations. International Journal for Numerical Methods in Engineering, 64 (2005), 1133-1165.

PUBLICATIONS in 2004

Papers in international journals

  1. F. Auricchio, C. Lovadina, A.L. Madureira. An asymptotically optimal model for isotropic heterogeneous linearly elastic plates. ESAIM Mathematical Modelling and Numerical Analysis, 38:877-897.
  2. F. Migliavacca, L. Petrini, P. Massarotti, S. Schievano, F. Auricchio, G. Dubini. Stainless and shape memory alloy coronary stents: a computational study on the interaction with the vascular wall. Biomechanics and Modeling in Mechanobiology, 2:205-217.
  3. F. Auricchio, U. Stefanelli. Numerical analysis of a 3D super-elastic constitutive model. International Journal for Numerical Methods in Engineering, 61:142-155.
  4. F. Auricchio, L. Petrini. A three-dimensional model describing stress-temperature induced solid phase transformations. Part I: solution algorithm and boundary value problems. International Journal for Numerical Methods in Engineering, 61:807-836.
  5. F. Auricchio, L. Petrini. A three-dimensional model describing stress-temperature induced solid phase transformations. Part II: thermomechanical coupling and hybrid composite applications. International Journal for Numerical Methods in Engineering, 61:716-737.
  6. F. Auricchio, F. Brezzi, C. Lovadina. Mixed Finite Element Methods, a chapter in “Encyclopedia of Computational Mechanics”. Edited by E.Stein, R.de Borst and T.R.J.Hughes. John Wiley & Sons Ltd.
  7. L. Petrini, F. Migliavacca, F. Auricchio, G. Dubini. Numerical investigation of the intravascular coronary stent flexibility. Journal of Biomechanics, 37:495-501.
  8. G.M. Calvi, P. Ceresa, D. Bolognini, C. Casarotti, F. Auricchio. Effects of axial force variation in the seismic response of bridges isolated with friction pendulum systems. Journal of Earthquake Engineering, 8:187-224.

 

PUBLICATIONS in 2003

Papers in international journals

  1. R.L. Taylor, F.C. Filippou, A. Saritas, F. Auricchio. Mixed finite element method for beam and frame problems. Computational Mechanics, 31:192-203.
  2. F. Auricchio, S. Marfia, E. Sacco. Modelling of SMA materials: training and two way shape memory effects. Computers & Structures, 81:2301-2317.
  3. V. Cacciafesta, M.F. Sfondrini, A. Ricciardi, A. Scribante, C. Klersy, F. Auricchio. Evaluation of friction of stainless steel and esthetic self-ligating brackets in various bracket-archwire combinations. American Journal of Orthodontics and Dentofacial Orthopedics, 124:395-402.
  4. V. Cacciafesta, M.F. Sfondrini, A. Scribante, C. Klersy, F. Auricchio. Evaluation of friction of conventional and metal-insert ceramic brackets in various bracket-arch wire combinations. American Journal of Orthodontics and Dentofacial Orthopedics 124:403-409.
  5. F. Auricchio, E. Sacco. Refined first-order shear deformation theory models for composite laminates. Journal of Applied Mechanics, 70:381-390.
  6. C. Lovadina, F. Auricchio. On the enhanced strain technique for elasticity problems. Computer & Structures, 81:777-787.
  7. F. Auricchio, L. Petrini, R. Pietrabissa, E. Sacco. Numerical modeling of shape-memory alloys in orthodontics. Computer Modeling in Engineering & Sciences, 4:365-380.
  8. F. Auricchio, L. Beirao da Veiga. On a new integration scheme for von-Mises plasticity with linear hardening. International Journal for Numerical Methods in Engineering, 56:1375-1396.

 

PUBLICATIONS in 2002

Papers in international journals

  1. F. Auricchio, L. Petrini. Improvements & algorithmical considerations on a recent three-dimensional model describing stress-induced solid phase transformations. International Journal for Numerical Methods in Engineering, 55:1255-1284.
  2. F. Auricchio, L. Beirao da Veiga, C. Lovadina. Remarks on the asymptotic behaviour of Koiter shells. Computer & Structures, 80:735-745.
  3. F. Migliavacca, L. Petrini, M. Colombo. F. Auricchio, R. Pietrabissa. Mechanical behavior of coronary stents investigated through the finite element method. Journal of Biomechanics, 35:803-811.

 

PUBLICATIONS in 2001

Papers in international journals

  1. F. Auricchio, E. Sacco. Thermo-mechanical modelling of a superelastic shape-memory wire under cyclic stretching-bending loadings. International Journal of Solids and Structures, 38:6123-6145.
  2. F. Auricchio. A robust integration-algorithm for a finite-strain shape-memory-alloy superelastic model. International Journal of Plasticity, 17:971-990.
  3. F. Auricchio, M. Di Loreto, E. Sacco. Finite element analysis of a stenotic artery revascularization through stent insertion. Computer Methods in Biomechanics and Biomedical Engineering, 4:249-263.
  4. M. Arrigoni, F. Auricchio, V. Cacciafesta, L. Petrini, R. Pietrabissa. Mechanical characterisation of orthodontic superelastic Ni-Ti wires. Journal de Physique IV, 11:509-514.
  5. F. Auricchio. Three-dimensional modeling of shape-memory materials. Journal de Physique IV, 11:577-582.
  6. G. Alfano, F. Auricchio, L. Rosati, E. Sacco. MITC finite elements for laminated composite plates. International Journal for Numerical Methods in Engineering, 50:707-738.
  7. F. Auricchio, P. Bisegna, C. Lovadina. Finite element approximation of piezoelectric plates. International Journal for Numerical Methods in Engineering, 50:1469-1499.
  8. F. Auricchio, C. Lovadina, E. Sacco. Analysis of mixed finite elements for laminated composite plates. Computer Methods in Applied Mechanics and Engineering, 190:4767-4783.
  9. F. Auricchio, C. Lovadina. Analysis of kinematic linked interpolation methods for Reissner-Mindlin plate problems. Computer Methods in Applied Mechanics and Engineering, 190:2465-2482.

 

PUBLICATIONS in 1999

Papers in international journals

  1. F. Auricchio, C. Lovadina. Partial selective reduced integration schemes and kinematic linked interpolations for plate bending problems. Mathematical Models and Methods in Applied Sciences , 9:693-722.
  2. F. Auricchio, E. Sacco. Partial mixed formulation and refined models for the analysis of composite laminates with a FSDT. Composites Structures, 46:103-113.
  3. F. Auricchio, E. Sacco. A mixed-enhanced finite-element for the analysis of laminated composite plates. International Journal for Numerical Methods in Engineering 44:1481-1504.
  4. F. Auricchio, E. Sacco. A temperature-dependent beam for shape-memory alloys: constitutive modelling, finite-element, implementation and numerical simulations. Computer Methods in Applied Mechanics and Engineering, 174:171-190.
  5. F. Auricchio, R.L. Taylor. A return-map algorithm for general associative isotropic elasto-plastic materials in large deformation regimes. International Journal of Plasticity, 15:1359-1378.

 

PUBLICATIONS in 1998

Papers in international journals

  1. C. Callari, F. Auricchio, E. Sacco. A finite-strain Cam-clay model in the framework of multiplicative elasto-plasticity. International Journal of Plasticity, 14:1155-1187.

 

PUBLICATIONS in 1997

Papers in international journals

  1. A. Masud, M. Panahandeh, F. Auricchio. A finite-strain finite element model for the pseudoelastic behavior of shape memory alloys. Computer Methods in Applied Mechanics and Engineering, 148:23-37.
  2. F. Auricchio. A viscoplastic constitutive equation bounded between two generalized plasticity models. International Journal of Plasticity, 13:697-721.
  3. F. Auricchio, E. Sacco. A one-dimensional model for superelastic shape-memory alloys with different elastic properties between austenite and martensite. International Journal of Nonlinear Mechanics, 32:1101-1114.
  4. F. Auricchio, E. Sacco. A superelastic shape-memory-alloy beam model. Journal of Intelligent Materials and Structures, 8:489-501.
  5. F. Auricchio, R.L. Taylor. Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior. Computer Methods in Applied Mechanics and Engineering, 143:175-194.
  6. F. Auricchio, J. Lubliner. A uniaxial model for shape-memory alloys. International Journal of Solids and Structures, 34:3601-3618.
  7. F. Auricchio, R.L. Taylor, J. Lubliner. Shape-memory alloys: macro-modelling and numerical simulations of the superelastic behavior. Computer Methods in Applied Mechanics and Engineering, 146:281-312.

 

PUBLICATIONS in 1996

Papers in international journals

  1. F. Auricchio, E. Sacco. Augmented Lagrangian finite-elements for plate contact problems. International Journal for Numerical Methods in Engineering, 39:4141-4158.
  2. J. Lubliner, F. Auricchio. Generalized plasticity and shape-memory alloys. International Journal of Solids and Structures, 33:991-1003.

 

PUBLICATIONS in 1995

Papers in international journals

  1. F. Auricchio, R.L. Taylor. Two material models for cyclic plasticity: non-linear kinematic hardening and generalized plasticity. International Journal of plasticity, 11:65-98.
  2. F. Auricchio, R.L. Taylor. A triangular thick plate finite element with an exact thin limit. Finite Element in Analysis and Design, 19:57-68.

 

PUBLICATIONS in 1994

Papers in international journals

  1. F. Auricchio, R.L. Taylor. A generalized visco-plasticity model and its algorithmic implementation. Computers & Structures, 53:637-647.
  2. F. Auricchio, R.L. Taylor. A generalized elasto-plastic plate theory and its algorithmic implementation. International Journal for Numerical Methods in Engineering, 37:2583-2608.
  3. F. Auricchio, R.L. Taylor. A shear deformable plate element with an exact thin limit. Computer Methods in Applied Mechanics and Engineering, 118:393-412.

 

PUBLICATIONS in 1993

Papers in international journals

  1. J. Lubliner, R.L. Taylor, F. Auricchio. A new model of generalized plasticity. International Journal Solids and Structures, 30:3171-3184.
  2. R.L. Taylor, F. Auricchio. Linked interpolation for Reissner-Mindlin plate elements. Part II: a simple triangle. International Journal for Numerical Methods in Engineering, 36:3057-3066.